HEIL® RGH181HFBH0AAA 1094165

HEIL® Single Package Rooftop Gas Heat/Electric Cooling Unit, Series: RGH, 181000 Btu/hr Cooling, 220000 - 400000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 75.8 A, 14.3 kW, 1/4 hp, 826 - 1009 rev/min Evaporator, 1100 rev/min Condenser, 60 Hz, 3 -Phase, Scroll Compressor, Configuration: Evaporator Coil - 22 sq-ft Face Area, 15 Fins/in, Condenser Coil - 21.4 sq-ft Face Area, 17 Fins/in, 13 IEER Rating, 12 EER, 15 ton, 2 Cool -Stage, R-410A Refrigerant, 84.1 dBA Decibel Rating, Direct Spark Ignition Ignition, Steel, Galvanized, Baked Enamel-Coated, 127-7/8 in L x 86-3/8 in W x 49-3/8 in H

• One-piece, high efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
• Dedicated vertical (supply air/return air) air flow duct configuration
• Full perimeter base rail with built-in rigging adapters and fork truck slots
• Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
• Fully insulated cabinet for quiet operation
• Two-stage cooling with independent circuits and control
• Redundant gas valve for two-stage gas heating capacity control
• Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
• High efficiency, gas heat with induced draft flue exhaust design
• 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
• Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, end drain
• Belt drive evaporator fan motor and pulley combinations
• Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box and compressors
• No-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the units metal
• Standard outdoor temperature cooling operation range up to 125 deg F
• 10 years limited warranty on aluminized stainless steel heat exchanger, five-years compressor limited warranty, one-year parts limited warranty
• Economizer with bara-relief, enthalpy sensor
• Aluminum/copper condenser and evaporator coil
• Original design sales digit
• 81% thermally efficient

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_RGH181HFBH0AAA_Specification_Sheet.pdf