WELCOME TO OUR SITE! START SHOPPING!
.png)
Johnson Controls Pneumatic Valve Actuator, 1/8 in NPT, 120/240 VAC at 50/60 Hz, 30 lbf/sq-in Control, For Use With: 1/2 in Flare Valve, VT Series Valves and 3/4 to 1-1/2 in Cage Trim Valves, Die-Cast Aluminum Housing, Enamel, -20 to 150 deg F Operating, 281 deg F Maximum Media, 4-7/16 in Dia x 3 in H
| Dimensions | : | 4-7/16 in Dia x 3 in H |
| Finish | : | Enamel |
| Material | : | Die-Cast Aluminum Housing |
| Pressure Rating | : | 30 lbf/sq-in Control |
| Size | : | 1/8 in NPT |
| Suitable For Use With | : | 1/2 in Flare Valve, VT Series Valves and 3/4 to 1-1/2 in Cage Trim Valves |
| Temperature Rating | : | -20 to 150 deg F Operating, 281 deg F Maximum Media |
| Voltage Rating | : | 120/240 VAC at 50/60 Hz |
- The V-3000 Series pneumatic actuator can position steam or water valve-modulating plugs in response to a pneumatic signal from a controller
- Molded synthetic rubber diaphragm design provides a constant effective area throughout the valve stem stroke
- Die-cast aluminum housing-coated with corrosion-resistant finish
- Remove or reposition actuator by loosening a single set screw
- Easily field-mounted to the valve bonnet with a single set screw
- Can be mounted to any of the V-3000, V-4000 or VT Series valves
- 1/8 in NPT barbed fitting for 5/32 in OD polytubing air connection
Catalog