TEMPSTAR® Single Package Rooftop Gas Heat/Electric Cooling Unit, Series: RGS, 280000 Btu/hr Cooling, 220000 - 400000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 127.8/126.9 A, 28.6 kW, 1/4 hp, 717 - 911 rev/min Evaporator, 1100 rev/min Condenser, 60 Hz, 3 -Phase, Scroll Compressor, Configuration: Evaporator Coil - 23.11 sq-ft Face Area, 15 Fins/in, Condenser Coil - 27.1 sq-ft Face Area, 17 Fins/in Circuit A and 27.1 sq-ft Face Area, 17 Fins/in Circuit B, Vertical SA/RA (SA = Supply Air, RA = Return Air), 9.8 EER, 25 ton, 2 Cool -Stage, R-410A Refrigerant, 85.9 dBA Decibel Rating, Belt Drive, 3/4 in Condensate Drain Connection, 10 - 55 deg F, 141-1/2 in L x 86-5/8 in W x 57-3/8 in H
Amperage Rating |
: |
127.8/126.9 A |
Compressor Type |
: |
Scroll |
Configuration |
: |
Evaporator Coil - 23.11 sq-ft Face Area, 15 Fins/in, Condenser Coil - 27.1 sq-ft Face Area, 17 Fins/in Circuit A and 27.1 sq-ft Face Area, 17 Fins/in Circuit B, Vertical SA/RA (SA = Supply Air, RA = Return Air) |
Connection Type |
: |
3/4 in Condensate Drain |
Decibel Rating |
: |
85.9 dBA |
Dimensions |
: |
141-1/2 in L x 86-5/8 in W x 57-3/8 in H |
Drive Type |
: |
Belt |
EER Rating |
: |
9.8 |
Frequency Rating |
: |
60 Hz |
HP Rating |
: |
1/4 hp |
Input BTU Rating |
: |
280000 Btu/hr Cooling, 220000 - 400000 Btu/hr Heating |
Number of Stages |
: |
2 Cool |
Phase |
: |
3 |
Refrigerant Type |
: |
R-410A |
Rotational Speed |
: |
717 - 911 rev/min Evaporator, 1100 rev/min Condenser |
Series |
: |
RGS |
Temperature Rating |
: |
10 - 55 deg F |
Tonnage |
: |
25 ton |
Voltage Rating |
: |
208 - 230 VAC |
Wattage |
: |
28.6 kW |
- High efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
- Field convertible from vertical to horizontal air flow
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- Fully insulated cabinet
- Redundant gas valve, up to two-stage of heating
- Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- High efficiency, gas heat with induced draft flue exhaust design
- Scroll compressors with internal line break overload protection
- 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Round tube plate fin evaporator and condenser coil design
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, end drain
- Belt drive evaporator fan motor and pulley combinations
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box and compressors
- No-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the units metal
- Standard outdoor temperature cooling operation range up to 115 deg F and down to 30 deg F
- Fixed orifice metering devices on all models to precisely control refrigerant flow
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
- 10 years limited warranty on aluminized steel heat exchanger, five-years compressor limited and one-year parts limited warranty
-
Catalog
https://assets.unilogcorp.com/267/ITEM/DOC/TEMPSTAR_RGS121HFCA0AAA_Catalog.pdf
-
Instruction/Installation Manual
https://assets.unilogcorp.com/267/ITEM/DOC/TEMPSTAR_RGS240HDAA0AAA_Manual.pdf
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/TEMPSTAR_RGS300HDAA0AAA_Specification_Sheet.pdf