WELCOME TO OUR SITE! START SHOPPING!
.png)
TEMPSTAR® Single Package Rooftop Gas Heat/Electric Cooling Unit, Series: RGS, 114000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating Input BTU, 460 VAC, 21.5 A, 325 W Wattage, 1/4 hp, 591 to 838 rpm Evaporator, 1100 rpm Condenser Rotational Speed, 60 Hz, 3 ph Phase, (2) Scroll Compressor, Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in, 3000 to 5000 cfm, 11.1 EER Rating, 80 to 81 % AFUE, 10 ton Tonnage, 2 Cool Stages, R-410A Refrigerant, 82 dBA Decibel Rating, Direct Spark Ignition, Belt Drive, 3/4 in Condensate Drain Connection, 88-1/8 in L x 59-1/2 in W x 49-3/8 in H
| AFUE Rating | : | 80 to 81 % |
| Amperage Rating | : | 21.5 A |
| CFM Rating | : | 3000 to 5000 cfm |
| Compressor Type | : | (2) Scroll |
| Configuration | : | Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in |
| Connection Type | : | 3/4 in Condensate Drain |
| Decibel Rating | : | 82 dBA |
| Dimensions | : | 88-1/8 in L x 59-1/2 in W x 49-3/8 in H |
| Drive Type | : | Belt |
| EER Rating | : | 11.1 |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/4 hp |
| Ignition Type | : | Direct Spark |
| Input BTU Rating | : | 114000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating |
| Number of Stages | : | 2 Cool |
| Phase | : | 3 ph |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 591 to 838 rpm Evaporator, 1100 rpm Condenser |
| Series | : | RGS |
| Tonnage | : | 10 ton |
| Voltage Rating | : | 460 VAC |
| Wattage | : | 325 W |
- High efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
- Field convertible from vertical to horizontal air flow
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- Fully insulated cabinet
- Redundant gas valve, up to two-stage of heating
- Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- High efficiency, gas heat with induced draft flue exhaust design
- Scroll compressors with internal line break overload protection
- All units have high/low pressure switches
- 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Newly - designed indoor refrigerant header for easier maintenance and replacement
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
- Belt drive evaporator fan motor and pulley combinations
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box and compressors
- No-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the units metal
- Newly - designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Outdoor temperature cooling operation range up to 115 deg F and down to 25 deg F using winter start kit
Catalog