WELCOME TO OUR SITE! START SHOPPING!
.png)
TEMPSTAR® Single Package Rooftop Gas Heat/Electric Cooling Unit, Series: RGS, 90000 Btu/hr Cooling, 125000 to 224000 Btu/hr Heating Input BTU, 460 VAC, 12.2 A Rated Load, 100 A Locked Rotor, 8 kW Wattage, 1/4 hp, 489 to 747 rpm Evaporator, 1100 rpm Condenser Rotational Speed, 60 Hz, 3 ph Phase, Scroll Compressor, Evaporator Coil - 8.9 sq-ft Face Area, 15 Fins/in, Condenser Coil - 20.5 sq-ft Face Area, 17 Fins/in, Vertical/Horizontal, 2250 to 3750 cfm, 11 EER Rating, 80 to 81 % AFUE, 7.5 ton Tonnage, R-410A Refrigerant, 82 dBA Decibel Rating, Belt Drive, Pre-Painted, 88-1/8 in L x 59-1/2 in W x 41-1/4 in H
| AFUE Rating | : | 80 to 81 % |
| Amperage Rating | : | 12.2 A Rated Load, 100 A Locked Rotor |
| CFM Rating | : | 2250 to 3750 cfm |
| Compressor Type | : | Scroll |
| Configuration | : | Evaporator Coil - 8.9 sq-ft Face Area, 15 Fins/in, Condenser Coil - 20.5 sq-ft Face Area, 17 Fins/in, Vertical/Horizontal |
| Decibel Rating | : | 82 dBA |
| Dimensions | : | 88-1/8 in L x 59-1/2 in W x 41-1/4 in H |
| Drive Type | : | Belt |
| EER Rating | : | 11 |
| Finish | : | Pre-Painted |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/4 hp |
| Input BTU Rating | : | 90000 Btu/hr Cooling, 125000 to 224000 Btu/hr Heating |
| Phase | : | 3 ph |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 489 to 747 rpm Evaporator, 1100 rpm Condenser |
| Series | : | RGS |
| Tonnage | : | 7.5 ton |
| Voltage Rating | : | 460 VAC |
| Wattage | : | 8 kW |
- High efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
- Field convertible from vertical to horizontal air flow
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- Fully insulated cabinet
- Redundant gas valve, up to two-stage of heating
- Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- High efficiency, gas heat with induced draft flue exhaust design
- One-compressor, scroll compressors with internal line-break overload protection
- All units have high/low pressure switches
- 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
- Belt drive evaporator fan motor and pulley combinations
- Outdoor temperature cooling operation range up to 115 deg F and down to 25 deg F using winter start kit
- Fixed orifice metering devices on all models to precisely control refrigerant flow
- 5 years limited warranty on compressor and one-year limited warranty on parts
- None outdoor air control (A)
- Aluminum/copper condenser and evaporator coil
Catalog