WELCOME TO OUR SITE! START SHOPPING!
.png)
TEMPSTAR® Fan Coil, Series: FMA4P Series, 18000 Btu/hr, 208 to 230 V, 0.8 A, 1/6 hp HP Rating, 60 Hz, 1 ph, 600 cfm CFM Rating, 1.5 ton, R-410A, 3/8 in, 3/4 in, FNPT x Sweat, 2.149 sq-ft Face Area, Galvanized, Gray, 36-1/2 in H x 20-1/2 in W x 15 in D
| Amperage Rating | : | 0.8 A |
| BTU Rating | : | 18000 Btu/hr |
| CFM Rating | : | 600 cfm |
| Color | : | Gray |
| Connection Size | : | 3/8 in, 3/4 in |
| Connection Type | : | FNPT x Sweat |
| Dimensions | : | 36-1/2 in H x 20-1/2 in W x 15 in D |
| Face Area | : | 2.149 sq-ft |
| Finish | : | Galvanized |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/6 hp |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Series | : | FMA4P Series |
| Tonnage | : | 1.5 ton |
| Voltage Rating | : | 208 to 230 V |
- Front return convertible to bottom return
- Sealed to meet 2% cabinet leakage when tested at 1 in-WC of static pressure
- Fully insulated for conditioned space (not to be installed in unconditioned spaces)
- Aluminum tube, aluminum fin evaporator coil
- Motor suspended on rubber grommets for quieter operation
- Fresh air intake holes (capped from factory)
- Units fits between standard stud spacing's
- All service access is located in the front
- Primary and secondary drain connections exit from the bottom
- No return, air ductwork required in specific applications
- Direct drive blower
- 1075 rev/min rated, three speed PSC motor
- 1 A fuse rating
- 16 x 20 x 1 in filter size
- Wall handing brackets included with the unit
Instruction/Installation Manual