WELCOME TO OUR SITE! START SHOPPING!
.png)
1 1/2 in to 4 in (30 mm to 110 mm) Drain Lines.
RIDGID® C Cutter, 1 in W, Suitable For Use With: K-50 Sectional Machines, K-400 and K-3800 Drum Machines
| Suitable For Use With | : | K-50 Sectional Machines, K-400 and K-3800 Drum Machines |
| Width | : | 1 in |
- 3/8 in (10 mm) cable best for 1 1/2 in to 3 in (40 mm to 75 mm) lines
- 1/2 in (12 mm) cable best for 3 in to 4 in (50 mm to 110 mm) lines
- Integrated Transport Cart - Easy movement to and from the job site, Heavy-duty, large wheels easily navigate over bumps and up stairs
- Retractable Handle - high-handle height during transport
- Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered
- inSolid Core'' Cable - uses tough 3⁄8 in (10 mm) or 1⁄2 in (12 mm) Integral Wound (IW) solid core cable that is rugged and kink resistant
- AUTOFEED® Control - offered as an accessory, this patented, automatic cable feed powers cable in and out of the drain, Reverse the direction of the AUTOFEED and the cable feeds back into the drum
- Drum Capacity: 100' (30,5 m) of 3⁄8 in (10 mm) diameter cable or 75' (22,5 m) of 1⁄2 in (12 mm) diameter cable
- Motor: 1/3 HP, motor spins cable at 165 RPM
- Weight (Machine Only): 45 lbs, (20.4 kg)
- Dimensions: Length 21 in (53 cm) 24 in (61 cm) with AUTOFEED, Height 23 in (58,5 cm)Width 17 in (43.2 cm)
- All Model K-400 machines are supplied with RIDGID® drain cleaning gloves and operator'smanual
Catalog