WELCOME TO OUR SITE! START SHOPPING!
.png)
P100 Series switches are encapsulated, nonadjustable, single-pole, single-throw (SPST) and single-pole, double-throw (SPDT), direct-mount switches for use with non-corrosive refrigerants. The switches are available with automatic reset in both open low and open high configurations and manual reset is available with open high action.
PENN® Encapsulated Pressure Switch, P100 Series, 240 to 120 VAC, 2.9 to 6 A, 3500 psi Burst Pressure, 200 psi Differential, Set Points: 15 psig Open, 30 psig Close, 15 psig Open, 30 psig Close, SPST, SPDT Switch, 1/4 in Connection, Flared Connection, 48 in Lead, Manual, -20 to 150 deg F, Direct Mount
| Amperage Rating | : | 2.9 to 6 A |
| Close Pressure | : | 30 psig |
| Connection Size | : | 1/4 in |
| Connection Type | : | Flared |
| Differential Pressure | : | 200 psi |
| Lead Length | : | 48 in |
| Mounting Type | : | Direct |
| Open Pressure | : | 15 psig |
| Pressure Rating | : | 3500 psi Burst |
| Reset Type | : | Manual |
| Series | : | P100 Series |
| Set Points | : | 15 psig Open, 30 psig Close |
| Switch Type | : | SPST, SPDT |
| Temperature Rating | : | -20 to 150 deg F |
| Voltage Rating | : | 240 to 120 VAC |
- Compact size and lightweight for direct mounting
- Trip-free manual reset on manual reset models, contacts cannot be overridden by continued depression of the reset button
- Use with all non-corrosive refrigerants
- Dust tight encapsulated switch
- 1/4 in internal flare fitting with built-in Schrader type depressor is standard
- Electrical connections are made to 48 in leads
- Tamper-proof, factory calibrated pressure setpoints
- Open construction, conduit clamp or conduit box