WELCOME TO OUR SITE! START SHOPPING!
.png)
The PG95ESA Multipoise Condensing Gas Furnace features a single-stage gas valve and a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) up to 96.0% AFUE, this furnace provides added savings over standard gas furnaces. It features 4-way multi-poise installation flexibility and is available in ten model sizes. All sizes except the 26000 Btu/hr model can be vented for direct-vent/two-pipe, ventilated combustion air or single-pipe applications. The 26000 Btu/hr model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada and select sizes are certified for mobile/manufactured home use with conversion kit accessory.
Payne® Condensing Gas Furnace, Model: PG95ESA, 100000 Btu/hr Input BTU Rating, 97000 Btu/hr Output BTU Rating, 115 V, 12.6 A, 6000 cfm Rating, 1 hp, 95 to 96 % AFUE Rating, 1 ph Phase, 60 Hz, 1 Stages, Downflow, Horizontal, Upflow, NPT Connection, 1/2 in Connection, Liquid Propane, Natural Gas Fuel, 5 Burners, 5 Speed, 11 in Dia x 10 in W Blower Size, 21 in W x 19-1/2 in D x 35 in H Cabinet Dimensions, Fixed Speed Constant Torque ECM Motor, 400 to 1200 rpm Rotational Speed, Vent, Ducted or Ductless, 20 A Fuse Rating, 24 V Transformer Rating, Electric Ignition System, Hot Surface Silicon Nitride Ignition, 4.5 to 13.6 in-WC, Steel, Pre-Painted, 40 to 70 deg F Temperature Rise
| AFUE Rating | : | 95 to 96 % |
| Amperage Rating | : | 12.6 A |
| Blower Size | : | 11 in Dia x 10 in W |
| CFM Rating | : | 6000 cfm |
| Cabinet Dimensions | : | 21 in W x 19-1/2 in D x 35 in H |
| Configuration | : | Downflow, Horizontal, Upflow |
| Connection Size | : | 1/2 in |
| Connection Type | : | NPT |
| Finish | : | Pre-Painted |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Liquid Propane, Natural Gas |
| Fuse Rating | : | 20 A |
| HP Rating | : | 1 hp |
| Ignition System | : | Electric |
| Ignition Type | : | Hot Surface Silicon Nitride |
| Input BTU Rating | : | 100000 Btu/hr |
| Material | : | Steel |
| Model | : | PG95ESA |
| Motor Type | : | Fixed Speed Constant Torque ECM |
| Number of Burners | : | 5 |
| Number of Speeds | : | 5 |
| Number of Stages | : | 1 |
| Output BTU Rating | : | 97000 Btu/hr |
| Phase | : | 1 ph |
| Pressure Rating | : | 4.5 to 13.6 in-WC |
| Rotational Speed | : | 400 to 1200 rpm |
| Temperature Rise | : | 40 to 70 deg F |
| Transformer Rating | : | 24 V |
| Vent, Ducted or Ductless | : | Vent |
| Voltage Rating | : | 115 V |
- Single-stage operation and 5 speed blower motor for even levels of temperature control and comfort
- Dual fuel capable with a compatible heat pump and thermostat for energy saving heating performance
- Air purifier and humidifier compatible
- High temperature limit control helps prevent overheating
- Efficient multi-speed ECM blower motor
- Induced draft combustion motor
- Single-stage gas valve
- Aluminized steel primary heat exchanger, stainless steel secondary heat exchanger
- Reliable direct spark gas ignition
- Sound-reducing features - soft-mounted blower and inducer motor
- Compatible thermostat - heat/cool
Catalog