Payne® PA13NR04800G 1050882

Payne® Split-System Air Conditioner, PA13NR Series, 4 ton Nominal Capacity, 48000 Btu/hr Cooling Capacity, 208 to 230 V, 26.6 A, 1/4 hp, 1100 rpm Rotational Speed, 60 Hz, 1 ph Phase, Scroll Compressor, 3400 cfm, R-22 Refrigerant, 3/8 in Liquid Line, 7/8 in Suction Line, 76 dBA Sound Level, 40 A Fuse Rating, 23.79 sq-ft Face Area, Steel, Finish: Pre-Painted/Zinc Phosphate-Coated, 42 in H x 31-3/16 in W

• Dense grille variation
• The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years
• The permanent split capacitor-type motor was designed for optimum efficiency, the motor was then qualified under extreme conditions to help ensure a long, reliable life
• All screws on cabinet exterior are coated for a long-lasting, rust-resistant, quality appearance
• The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer
• Vertical air discharge carries sound and hot condenser air up and away from adjacent patio areas and foliage
• The base pan is designed for easy removal of water, dirt and leaves
• Each compressor is protected with internal temperature and current sensitive overloads
• An internal pressure relief valve provides high pressure protection to the refrigerant system
• For improved serviceability, all model are equipped with a compressor terminal plug
• Both service valves are brass, front seating-type with sweat connections
• Valves are externally located so refrigerant tube connections can be made quickly and easily, each valve has a service port for ease of checking operating refrigerant pressures
• One-access panel provides access to electrical controls, removal of top gives access to fan motor, compressor and condenser coil

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Payne_PA13NR04800G_Specification_Sheet.pdf