WELCOME TO OUR SITE! START SHOPPING!
.png)
The high efficiency gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. The rounded corner jacket provides a pleasing "appliance appearance." Design certified by CSA for application in Canada and the United States.
OXBOX™ Gas Furnace, Series: J801X Series, 45000 Btu/hr Input BTU Rating, 36000 Btu/hr Output BTU Rating, 115 V, 6.8 A, 350 cfm Rating, 1/2 hp Rating, 80 % AFUE, 1 ph, 60 Hz Frequency, 1 Stage, Upflow, Downflow, Horizontal Left/Right Configuration, NPT Connection, 1/8 in Connection, Liquid Propane, Natural Gas Fuel, 5 Speed, 14-1/2 in W x 28 in D x 34-1/2 in H Cabinet, ECM Motor, Vent, Ducted or Ductless, 4 in Vent, 15 A Fuse, 3 ton Tonnage, 24/120 VAC Transformer, Silicon Nitride Hot Surface Ignition System, 0.5 in-WG Pressure, Floor Mounting, 30 to 60 deg F Rise
| AFUE Rating | : | 80 % |
| Amperage Rating | : | 6.8 A |
| CFM Rating | : | 350 cfm |
| Cabinet Dimensions | : | 14-1/2 in W x 28 in D x 34-1/2 in H |
| Configuration | : | Upflow, Downflow, Horizontal Left/Right |
| Connection Size | : | 1/8 in |
| Connection Type | : | NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Liquid Propane, Natural Gas |
| Fuse Rating | : | 15 A |
| HP Rating | : | 1/2 hp |
| Ignition System | : | Silicon Nitride Hot Surface |
| Input BTU Rating | : | 45000 Btu/hr |
| Motor Type | : | ECM |
| Mounting Type | : | Floor |
| Number of Speeds | : | 5 |
| Number of Stages | : | 1 |
| Output BTU Rating | : | 36000 Btu/hr |
| Phase | : | 1 pH |
| Pressure Rating | : | 0.5 in-WG |
| Series | : | J801X Series |
| Temperature Rise | : | 30 to 60 deg F |
| Tonnage | : | 3 ton |
| Transformer Rating | : | 24/120 VAC |
| Vent Size | : | 4 in |
| Vent, Ducted or Ductless | : | Vent |
| Voltage Rating | : | 115 V |
- All units and each component are tested on the manufacturing line
- Easy-to-apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
- Heavy gauge aluminized steel heat exchanger assures a long life
- Assures a warm duct temperature at furnace start-up
- Adjustable blower-off settings (60, 90, 120 and 180 sec)
- Increases life of heat exchanger
- Innovative application of a silicon nitride igniter
- Utilizes proven Smartlite® technology
- All models equipped with high static blowers
- Increases cooling performance
- May be vented with dedicated venting system or common vented with other category one appliances
- Maximize efficiencies
- On select units, a SEER improvement of up to one point is realized
- Designed to give a wide range of cooling capacities
- Switches on PCB, provide ultra easy motor speed selection
Catalog