WELCOME TO OUR SITE! START SHOPPING!

Mitsubishi Electric LGH-F300RX5-E1 1125943
  1. pin-int

Mitsubishi Electric LGH-F300RX5-E1 1125943

Mitsubishi Electric LGH-F300RX5-E1 Lossany Energy Recovery Ventilation, 300 cu-ft/min Air Flow, 208 - 230 VAC

  • Manufacturer: Mitsubishi Electric Corporation
  • Brand Name: Mitsubishi Electric
  • Part Number: 1125943
  • MPN: LGH-F300RX5-E1
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Mitsubishi Electric Lossany Energy Recovery Ventilation, 300 cu-ft/min Air Flow, 0.32 - 1.35 A, 208 - 230 VAC, 60 Hz, 1 -Phase, 67 - 300 W, 50 - 63% Cooling Enthalpy Recovery Efficiency, 0.06 - 0.78 in WG External Static Pressure, 18 - 37 dBA, 65.5 - 81% Temperature Recovery Efficiency, Sheet Steel, Galvanized, 14 - 104 deg F, 80% or Less RH Humidity, 40 in L, 34-15/16 in W, 12-3/8 in H

Air Flow Capacity      :      300 cfm
Amperage Rating      :      0.32 to 1.35 A
Enthalpy Recovery Efficiency      :      50 to 63% Cooling
Finish      :      Galvanized
Frequency Rating      :      60 Hz
Height      :      12-3/8 in
Humidity Rating      :      80% or Less RH
Length      :      40 in
Material      :      Sheet Steel
Phase      :      1 ph
Power Rating      :      67 to 300 W
Pressure Rating      :      0.06 to 0.78 in-WG External Static
Sound Level      :      18 to 37 dBA
Temperature Rating      :      14 to 104 deg F
Temperature Recovery Efficiency      :      65.5 to 81 %
Voltage Rating      :      208 to 230 VAC
Width      :      34-15/16 in
  • Lossnay cross-flow energy recovery core
  • Minimal cross contamination (less than 1% overall) between entering and leaving air streams
  • Stand-alone control
  • External input bypass damper control
  • Stand alone or interlocks with all Mitsubishi product
  • Standard filter provided (MERV-6)
  • 2.5 A starting current, 1.8 A minimum circuit, 15 A maximum overcurrent protection
  • PZ-60DR Lossnay controller: controls 1-15 Lossnay units, on/off, fan speed and vent mode
  • Operation mode - heat recovery, bypass, auto
  • Heat exchange system - air-to-air total heat (sensible heat + latent heat) exchange, no moving parts
  • Heat exchange material - partition, spacing plate-cellulose fiber membrane
  • Blower - 9-5/8 in Dia centrifugal fan
  • Motor - totally enclosed capacitor permanent split-phase 0.52 hp induction motor, 4 poles, 2 units
  • Fan speed extra-low, low, high, extra-high
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Mitsubishi_Electric_LGH_F470RX5_E1_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Mitsubishi_Electric_LGH_F600RX5_E1_Manual.pdf
  • pdfSubmittal https://assets.unilogcorp.com/267/ITEM/DOC/Mitsubishi_Electric_LGH_F300RX5_E1_Submittal.pdf