Kidde® 21006377 1098033

The Kidde® KN-COSM-IBA uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor - which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires - with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.

Kidde® Smart Interconnect Carbon Monoxide and Smoke Alarm, Series: KN-COSM-IBA, 120 VAC, 60 Hz 45 mA Maximum per Alarm (2) AA Battery Backup, Red LED Visual Indicator, 85 dBA at 10 ft Sound Level, 40 to 100 deg F, Surface Mounting, White, 6.6 in Width, 6.2 in Height, 13-1/2 in Depth

• Smart Interconnect - interconnects up to 24 Kidde devices (of which 18 can be initiating)
• Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracket
• Battery lockout system - the battery door will not close unless the batteries are properly installed
• Alarm tAer resist - helps deter from tAering and theft
• Adjustable mounting bracket-makes installation fast and easy, works with existing smoke and combination smoke and CO mounting brackets
• Peak level memory-announces "carbon monoxide previously detected" if alarm has detected a co level of 100 ppm or higher since it was last reset
• Hush feature-silences nuisance alarms for approximately 9 min
• Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires
• Test button functions - tests the unit for proper operation, peak level memory, resets the carbon monoxide alarm
• Green LED-Illuminates to indicate the unit is receiving AC power, flashes once every 60 seconds to indicate battery only mode, flashes once per sec during alarm to indicate initiating alarm, flashes once every 16 sec to indicate smoke or CO previously detected, flashes every 2 sec while the alarm is in HUSHTM mode
• Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash, if the unit malfunctions, the red LED will flash and the unit will chirp every 30 sec
• Battery backup (2-AA batteries included) - provides protection during power outages
• Ionization (smoke sensor), electrochemical (CO sensor)
• 0.89% per ft sensitivity
• LED display

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Kidde_21006377_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Kidde_21006377_Specification_Sheet.pdf