WELCOME TO OUR SITE! START SHOPPING!
.png)
Kenmore Gas Furnace, N8MXL Model, 88000 Btu/hr Input BTU Rating, 115 VAC, 16.9 A, 12.9 A Unit, 2000 cu-ft/min, 1 hp at 1050 rev/min, 80% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, 1/2 in NPT Connection, Natural Gas Fuel, 21 in W x 33-1/3 in H x 29 in D Cabinet Dimensions, 40 V-A at 24 VAC Transformer, Steel, 25 - 55 deg F Rise
| AFUE Rating | : | 80 % |
| Amperage Rating | : | 16.9/12.9 A Unit |
| CFM Rating | : | 2000 cfm |
| Cabinet Dimensions | : | 21 in W x 29 in D x 33-1/3 in H |
| Configuration | : | Multi-Position |
| Connection Type | : | 1/2 in NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| HP Rating | : | 1 hp at 1050 rpm |
| Input BTU Rating | : | 88000 Btu/hr |
| Material | : | Steel |
| Model | : | N8MXL |
| Phase | : | 1 ph |
| Temperature Rise | : | 25 to 55 deg F |
| Transformer Rating | : | 40 VA at 24 VAC |
| Voltage Rating | : | 115 VAC |
- Flame roll-out sensors standard
- Category I venting
- Blocked vent switch
- 24 VAC humidifier terminal
- Electronic air cleaner terminal
- Cabinet air leakage less than 2% at 1 in WC and cabinet air leakage less than 1.4% at 1/2 in WC when tested in accordance with ASHRAE standard 193
- ECM blower motor
- Adjustable heating blower OFF delay
- Factory set blower ON delay
- RPJ aluminized steel heat exchanger
- High temperature limit control prevents overheating
- Direct ignition with silicon nitride igniter
- One piece prepainted steel cabinet
Instruction/Installation Manual