WELCOME TO OUR SITE! START SHOPPING!
.png)
Kenmore Gas Furnace, F9MXT Model, 80000 Btu/hr Input BTU Rating, 115 VAC, 2000 cu-ft/min, 96% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, 1/2 in NPT Connection, Natural Gas Fuel, 40 V-A at 24 VAC Transformer, Steel
| AFUE Rating | : | 96 % |
| CFM Rating | : | 2000 cfm |
| Configuration | : | Multi-Position |
| Connection Type | : | 1/2 in NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Input BTU Rating | : | 80000 Btu/hr |
| Material | : | Steel |
| Model | : | F9MXT |
| Phase | : | 1 ph |
| Transformer Rating | : | 40 VA at 24 VAC |
| Voltage Rating | : | 115 VAC |
- Extra SEER variable speed ECM blower motor
- Certified to leak 2% or less of nominal air conditioning cu-ft/min delivered when pressurized to 1 in WC with all present air inlets, air outlets and condensate drain ports sealed
- Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, high quality, corrosion resistant, pre-painted steel cabinet
- Direct vent (2-pipe), single pipe venting or ventilated combustion air
- 24 VAC humidifier terminal and electronic air cleaner terminal
- Innovative knobs for easy door removal and secure attachment
- At least 12 different venting configurations
- Through the casing flue pipe for counterflow or horizontal applications with accessory
- Slide out heat exchanger and blower assembly
- Quieter two speed induced draft combustion blower
- Self diagnostics with super bright LED
- Four position upflow/down flow/horizontal installation
- Dehumidification feature in cooling
- 4.5 - 13.6 in WC inlet gas pressure
Instruction/Installation Manual