WELCOME TO OUR SITE! START SHOPPING!
.png)
Kenmore Gas Furnace, F9MVT Model, 100000 Btu/hr Input BTU Rating, 115 VAC, 1600 cu-ft/min, 96% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, 1/2 in NPT Connection, Natural Gas Fuel, 21 in W x 35 in H x 29-1/2 in D Cabinet Dimensions, 40 V-A at 24 VAC Transformer, Steel
| AFUE Rating | : | 96 % |
| CFM Rating | : | 1600 cfm |
| Cabinet Dimensions | : | 21 in W x 29-1/2 in D x 35 in H |
| Configuration | : | Multi-Position |
| Connection Type | : | 1/2 in NPT |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Input BTU Rating | : | 100000 Btu/hr |
| Material | : | Steel |
| Model | : | F9MVT |
| Phase | : | 1 ph |
| Transformer Rating | : | 40 VA at 24 VAC |
| Voltage Rating | : | 115 VAC |
- Extra SEER variable speed ECM blower motor
- Certified to leak 2% or less of nominal air conditioning cu-ft/min delivered when pressurized to 1 in WC with all present air inlets, air outlets and condensate drain ports sealed
- Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, stainless steel RPJ aluminized steel primary heat exchanger, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter
- Direct vent (2-pipe), single pipe venting or ventilated combustion air
- 24 VAC humidifier terminal and electronic air cleaner terminal
- Innovative knobs for easy door removal and secure attachment
- At least 12 different venting configurations
- Through the casing flue pipe for counterflow or horizontal applications with accessory
- Slide out heat exchanger and blower assembly
- Quieter - operates quieter at lower heating rates, 2-speed induced draft combustion blower, variable speed ECM blower motor
- Self configuring and communicating control
- Supports one and two-stage cooling units
- ECM variable speed blower motor
- 4.5 - 13.6 in WC inlet gas pressure
Instruction/Installation Manual