WELCOME TO OUR SITE! START SHOPPING!

  1. pin-int

KeepRite® CCH924GKA 1111971

KeepRite® CCH9 Series CCH924GKA Split-System Heat Pump, 208 to 230 V, 17.6 A, 24000 Btu/hr Cooling BTU, 1/5 hp, Steel

  • Manufacturer: Carrier
  • Brand Name: KeepRite®
  • Part Number: 1111971
  • MPN: CCH924GKA
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

KeepRite® Split-System Heat Pump, CCH9 Series, Model: SXT+, 208 to 230 V, 17.6 A, 1/5 hp, 60 Hz, 1 ph Phase, 556 to 613 rpm Rotational Speed, 24000 Btu/hr Cooling, 2662 to 2934 cfm, 19 SEER, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 25 A Fuse Rating, 25.15 sq-ft Face Area, 20 FPI Coil, Tonnage: 2 ton, 69 dBA Sound Level, 2 Stages, Steel, Finish: Baked-On Powder-Coated/Galvanized, 40-1/4 in H x 35 in W x 35 in D

Amperage Rating      :      17.6 A
BTU Rating      :      24000 Btu/hr Cooling
CFM Rating      :      2662 to 2934 cfm
Coil Rating      :      25.15 sq-ft Face Area, 20 FPI
Compressor Type      :      Scroll
Dimensions      :      40-1/4 in H x 35 in W x 35 in D
Finish      :      Baked-On Powder-Coated/Galvanized
Frequency Rating      :      60 Hz
Fuse Rating      :      25 A
HP Rating      :      1/5 hp
Liquid Line Size      :      3/8 in
Material      :      Steel
Model      :      SXT+
Number of Stages      :      2
Phase      :      1 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      556 to 613 rpm
SEER Rating      :      19
Series      :      CCH9 Series
Sound Level      :      69 dBA
Tonnage      :      2 ton
Voltage Rating      :      208 to 230 V
  • Coil guard grille
  • Copeland™ scroll UltraTech™ compressors on all models
  • Crankcase heater factory installed
  • Suction line accumulator factory installed, bi-flow filter drier included for field installation
  • Bi-flow filter drier included for field installation
  • Integrated solid state control with time temperature defrost
  • High and low refrigerant service ports
  • Discharge gas thermostat
  • Copper tube/post-painted (black) aluminum fin coil
  • Self-configuring installation capabilities with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • Outdoor temperature sensor factory installed
  • Ball bearing PSC fan motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
  • Easy-to install and service
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8 in grille spacing for extra protection
  • Corner posts for extra strength and style
  • 12.6 A rated load, 58.3 A locked rotor compressor, 1.8 A full load fan