Johnson Controls AP-VMA1420-0 1088186

Johnson Controls AP-VMA1420-0 Variable Air Volume Modular Assembly, Plastic

Johnson Controls Variable Air Volume Modular Assembly, 0 - 50 deg C Operating, -40 to 70 deg C Storage, Plastic, 6 in L x 4 in W x 4 in H

Dimensions	:	6 in L x 4 in W x 4 in H
Material	:	Plastic
Temperature Rating	:	0 - 50 deg C Operating, -40 to 70 deg C Storage

Cooling with reheat and/or fan powered
Terminations - 1/4 in spade lugs except communications, which are screw terminals
Controller addressing - DIP switch set (1-253), Address 254 is reserved (0 or 255 is used for software addressing), software addressable with HVAC pro release 8.01 or later
Communications bus - N2 bus between VMA controller and supervisory controller (three-wire) zone bus between VMA controller and room sensor (eight-pin phone jack or wire to spade lugs or optional plug-on terminals)
Mounts to damper shaft using single set screw and to duct with single mounting screw

Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Johnson_Controls_AP_VMA1420_0_Catalog.pdf
Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Johnson_Controls_AP_VMA1420_0_Manual.pdf

Johnson Controls AP-VMA1420-0