Johnson Controls A25AN-1 1047692

The A25 series warm air control with manual reset is designed to shut down fans, burners, dampers, etc., when the temperature of the sensed air becomes greater than the controller's setpoint. When the sensed temperature increases to the controller's setpoint, the A25's switch will open. Manual reset is required to reclose the electrical circuit. The A25 may be used as a high limit control in the supply air duct (or plenum) where a lockout type control is desired or required by local code.

Johnson Controls Warm Air Aquastat Control, Full Load: 16 A at 120 VAC, 9.2 A at 208 VAC, 8 A at 240 VAC, Locked Rotor: 96 A at 120 VAC, 55.2 A at 208 VAC, 48 A at 240 VAC, Non-Inductive: 16 A at 120, 208, 240, 277 VAC Contact, SPST, Flange for Flat Surface Mount, 0.063 in Galvanized Steel, 0.025 in Cold Rolled Steel, Galvanized, Gray Baked Enamel, 25 to 215 deg F, 125 deg F High Limit

• Opens on temperature rise
• Setpoint knob adjustment
• Trip-free reset lever
• Pilot-duty electrical rating for up to 600 V maximum
• Enclosed switch
• Rod and tube sensing element
• Adjustable duct-mounting flange
• Wide temperature range
• 104 deg F case and 300 deg F maximum ambient temperature
• 7/8 in Dia hole for 1/2 in conduit opening
• Snap acting contacts in dust protected enclosure switch
• Positive, trip-free reset mechanism (manual reset 2 operation), control can be reset when the temperature drops 20 deg F below the dial setting
• Bi-metal rod and tube construction sensing element
• Screw-type terminals wiring connection

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Johnson_Controls_A25AN_1_Specification_Sheet.pdf