WELCOME TO OUR SITE! START SHOPPING!
.png)
ICP™ Fan Coil with EC Motor and Piston Metering, Series: REM4P, 2 ton Nominal, 24000 Btu/hr BTU, 208/230 VAC, 4.1 A, 1/2 hp, 60 Hz, 1 -Phase, 800 cu-ft/min, Configuration: Multi-Position, 5/8 in Sweat Suction, 3/8 in Sweat Liquid Connection, R-410A Refrigerant, 13 x 21-1/2 in Filter, 14-5/16 in W x 42-11/16 in H x 22-1/16 in D
| Amperage Rating | : | 4.1 A |
| BTU Rating | : | 24000 Btu/hr |
| CFM Rating | : | 800 cfm |
| Configuration | : | Multi-Position |
| Connection Type | : | 5/8 in Sweat Suction, 3/8 in Sweat Liquid |
| Dimensions | : | 14-5/16 in W x 22-1/16 in D x 42-11/16 in H |
| Filter Size | : | 13 x 21-1/2 in |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Nominal Capacity | : | 2 ton |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Series | : | REM4P |
| Voltage Rating | : | 208/230 VAC |
- Factory installed piston metering device with teflon ring (TXV on 60 size)
- Primary and secondary drain fittings
- Multiple electrical entry locations
- Time delay relay (TDR) programmed in motor
- HUD approved for manufactured housing
- Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1 in water column
- 1 in Thick insulation with R value of 4.2
- Filter (washable) available as accessory
- Five-speed ECM motor
- Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down flow with accessory kits)
- Low voltage circuit protective fuse (3 A) inline on wire harness
- No heat (plug) kit factory installed
- Five-years limited parts warranty
- Copper tube/aluminum fin coil on standard models
Instruction/Installation Manual
