WELCOME TO OUR SITE! START SHOPPING!
.png)
Honeywell Cartridge Cage Valve, VCZM Series, 1/2 in Nominal, Sweat Connection, 3-Way, 300 lbf/sq-in Safe, 60 psi Close-Off, 3.7 Cv Flow Coefficient (Cv), Stainless Steel Stem, EPDM Rubber Packing, EPDM O-Ring Seat Seal, Bronze, Ryton™/Noryl Engineering Plastic Cartridge Material, 32 to 150 deg F Ambient, 34 to 203 deg F Fluid, 3-1/2 in L
| Cartridge Material | : | Ryton™/Noryl Engineering Plastic |
| Connection Type | : | Sweat |
| Dimensions | : | 3-1/2 in L |
| Flow Coefficient (Cv) | : | 3.7 Cv |
| Material | : | Bronze |
| Nominal Size | : | 1/2 in |
| Number of Ports/Ways | : | 3-Way |
| Packing Material | : | EPDM Rubber |
| Pressure Rating | : | 300 lbf/sq-in Safe, 60 psi Close-Off |
| Seal Material | : | EPDM O-Ring Seat |
| Series | : | VCZM Series |
| Stem Material | : | Stainless Steel |
| Temperature Rating | : | 32 to 150 deg F Ambient, 34 to 203 deg F Fluid |
- Cartridge cage valves are intended for hydronic applications in a normal indoor environment to control flow of hot/chilled water glycol solution upto 60% concentration
- Quick open and linear flow characteristics
- Mixing or diverting application
- A-AB-B body pattern
- 7000 Series valves for floating and modulating non-fail-safe applications
- 6000 Series valves for two position control
- High-close-off rating independent of Cu
- No tools required for actuator installation or removal
- Actuator removal does not require draining system
- Service is by replacement of cartridge, not valve body
- Cartridge replacement rebuilds valve to factory new condition
- Characterized cartridge can be controlled by either a low or a line voltage SPDT or SPST or floating controller comment
- 6 s time used with VC Series on/off model actuator
- Stem up to close a port valve action
- 0.4 in stem travel
- EPDM O-ring seals on noryl piston
Specification Sheet