WELCOME TO OUR SITE! START SHOPPING!
.png)
Primary control provides solid state, electronic flame safeguard protection for industrial and commercial single or dual fuel burners applications using ultraviolet flame detectors.
Honeywell Protectorelay® Primary Control Relay, 120 VAC, 9.5 W Maximum, 3 W Standby at 60 Hz, 10 W Maximum, 4 W Standby at 50 Hz Power, 50/60 Hz Frequency, 120 VAC Coil, Screw Mounting, -20 to 115 deg F at 60 Hz, -20 to 105 deg F at 50 Hz, 4-3/4 in Overall Length, 5 in Overall Width, 5 in Overall Height
| Coil Voltage | : | 120 VAC |
| Frequency Rating | : | 50/60 Hz |
| Mounting Type | : | Screw |
| Overall Height | : | 5 in |
| Overall Length | : | 4-3/4 in |
| Overall Width | : | 5 in |
| Power Rating | : | 9.5 W Maximum, 3 W Standby at 60 Hz, 10 W Maximum, 4 W Standby at 50 Hz |
| Temperature Rating | : | -20 to 115 deg F at 60 Hz, -20 to 105 deg F at 50 Hz |
| Voltage Rating | : | 120 VAC |
- Design for interrupted ignition with intermittent pilot on gas burners, and interrupted or intermittent ignition on oil burners
- Recycles if flame signal lost while in run, failure to establish pilot results in a lockout
- Safe start check prevents start-up if flame simulating failure occurs in flame detector circuit
- Includes SPDT alarm contacts
- Solid state circuitry, eliminates warm-up and increases resistance to vibration
- Mounts and removes easily through use of captive mounting screws
- Mounting base is made of strong thermoplastic
Catalog