WELCOME TO OUR SITE! START SHOPPING!
.png)
Honeywell MZV series is the first linear zone valve with a built-in balancing plug that permits pre-balancing for each zone.
Honeywell Motorized Zone Valve, MZV Series, 1-1/4 in Nominal, Sweat Connection, 2 Ways/Position, 125 psi, 7 Cv Flow Coefficient (Cv), Brass/Stainless Steel Trim, 15 s Opening, 5 s Closing Timing Range, 24 VAC, 5 to 95% Non-Condensing Relative Humidity
| Additional Information | : | 5 to 95% Non-Condensing Relative Humidity |
| Connection Type | : | Sweat |
| Flow Coefficient (Cv) | : | 7 Cv |
| Nominal Size | : | 1-1/4 in |
| Number of Ways/Position | : | 2 |
| Pressure Rating | : | 125 psi |
| Series | : | MZV Series |
| Timing Range | : | 15 s Opening, 5 s Closing |
| Trim Material | : | Brass/Stainless Steel |
| Voltage Rating | : | 24 VAC |
- Rack and pinion linear design
- Fast acting, 15 s to open, 5 s to close
- Two piece rack design to extend service life
- Low power consumption, 8 valves, 40 VA transformer
- External valve position indicator
- Quiet operation, no water hammer
- Built-in tamper-resistant balancing valve for pre-balancing
- High torque, constant speed synchronous motor
- Cooler running, longer life motor
- Operator can be replaced without draining system
- Manual opening feature
- Replaceable valve cartridge
- Large adjustable flow, 1/2 in 3/4 in Cu 5.8, 1 in 7 Cu, 1-1/4 in Cu 7
- Four wire operator with auxiliary switch
- Two wire without switch, 24 in leads
- Compatible with programmable thermostats
- 30 mm collar (valve/actuator interface)