The MX series is a state-of-the-art mixing valve that manages the hot and cold supply based on control settings. Accurate control of temperature provides energy savings, increased comfort and safety. The PTFE wear surfaces prevent calcium build-up.
Honeywell Thermostatic Mixing Valve, Series: MX Series, 1-1/4 in Nominal, NPT Connection, 150 psi, 50 gpm Flow Rate, 113 to 149 deg F, 7.7 in L
Connection Type |
: |
NPT |
Dimensions |
: |
7.7 in L |
Flow Rate |
: |
50 gpm |
Nominal Size |
: |
1-1/4 in |
Pressure Rating |
: |
150 psi |
Series |
: |
MX Series |
Temperature Rating |
: |
113 to 149 deg F |
- Dual purpose mixing or diverting valve
- Constant water temperature under different operating condition
- Proportional valve (control of hot and cold water)
- Flow reduction in seconds if cold water supply is interrupted
- Maintains temperature with extremely low minimum flows
- Temperature adjustable, tamper evident
- Install in any position, heat trapping not required
- Recirculation connection for fast response
- Wear surfaces PTFE-coated to prevent deposit build up
- Union/tailpiece connections included
- Tapped flange connections 2-1/2 and 3 in
- Allen wrench for temperature adjustment included
- Low-lead content less than 0.25% by weighted average
- Maximum pressure differential between hot and cold ports is 7 psi
- Minimum temperature difference between hot and mix should be 10 deg F
-
Catalog
https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_MX128LF_U_Catalog.pdf
-
Instruction/Installation Manual
https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_MX128LF_U_Instruction_Installation_Manual.pdf
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_MX128LF_U_Specification_Sheet.pdf