Honeywell DC120L-1-1-7-0-1-0-0-0 1059735

Honeywell Limit Controller, 90 to 264 V, 4 to 20 mA, LED Display, IP65, NEMA 3 Enclosure, DIN Mounting, Gray, 1.89 in H x 1.89 in W x 4.33 in D

• Two four-digit displays with seven-LED segments
• Two different configuration levels (Configuration mode and set-up mode) provide easy access to parameters
• Meets NEMA 3/IP65 front face protection against dust and water
• Accept seven different types of thermocouples, RTDs, current and voltage linear inputs
• All the option boards are jumper free and detected automatically by the instrument
• All the outputs (including the control output) of the instrument can be changed to meet the exact customer's needs
• Two soft alarms for PV, deviation high/low/absolute
• A special loop alarm is also provided to detect faults in the control loop by continuously analyzing the PV response to the control output
• A non-volatile memory based on EEPROM technology ensures data integrity during loss of power supply, with retention of more than 100 years
• A four-digit security code prevents unauthorized or accidental change
• Manual control (via bumpless transfer) is enabled by simply pressing the front face AUTO/MAN key
• The "SET" LED flashes and the output power is displayed on the lower display
• Output can be adjusted with the upper and lower keys
• Pre-tuning is used to set up the PID parameters close to the optimum values, which the self-tuning algorithm uses to subsequently optimize the tuning parameters
• The current setpoint can ramp to a new targeted setpoint by way of a user defined ramp rate

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_DC1202_1_0_0_0_1_0_0_0_Catalog.pdf