WELCOME TO OUR SITE! START SHOPPING!
.png)
Solid state electronic flame detectors for use with Honeywell flame safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.
Honeywell Flame Sensor, -20 to 175 deg F, 20 psi Pressure, Electrical Connection: 6 NEC Class 1 Color-Coded Lead Wires, 96 in Lead Length, NEMA 4 Enclosure, Purple, 7-7/32 in Overall Length, 5-1/4 in Overall Width, For Use With: R7247C and R7847C Flame Amplifiers
| Color | : | Purple |
| Electrical Connection | : | 6 NEC Class 1 Color-Coded Lead Wires |
| Enclosure Type | : | NEMA 4 |
| Lead Length | : | 96 in |
| Overall Length | : | 7-7/32 in |
| Overall Width | : | 5-1/4 in |
| Pressure Rating | : | 20 psi |
| Suitable For Use With | : | R7247C and R7847C Flame Amplifiers |
| Temperature Rating | : | -20 to 175 deg F |
- Mount horizontally, vertically or at any angle in between
- Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires
- Reduced nuisance shutdowns by wiring two in parallel
- C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell
- C7012A, E meets NEMA 4 standards with viewing window rated to 20 psi
Instruction/Installation Manual