WELCOME TO OUR SITE! START SHOPPING!
.png)
Honeywell Motorized Damper, 16 in Size, 24 VAC, 60 Hz, 6 V-A VA, Single Blade, 22 ga Steel, Galvanized, Side/Top Mounting, Power Closed, Spring Open, Reversible Motor, Round, 1 in WC Pressure, 40 - 140 deg F Ambient, Motor: 3-1/2 in W x 3 in H x 2-3/8 in D
| Blade Type | : | Single |
| Dimensions | : | Motor: 3-1/2 in W x 2-3/8 in D x 3 in H |
| Finish | : | Galvanized |
| Frequency Rating | : | 60 Hz |
| Material | : | 22 ga Steel |
| Motor Type | : | Power Closed, Spring Open, Reversible |
| Mounting Type | : | Side/Top |
| Pressure Rating | : | 1 in-WC |
| Shape | : | Round |
| Size | : | 16 in |
| Temperature Rating | : | 40 to 140 deg F Ambient |
| VA Rating | : | 6 VA |
| Voltage Rating | : | 24 VAC |
- Automatic round damper power-close, spring-open models ensure low leakage while controlling circulating air in heating, cooling and ventilation systems
- Galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage
- Designated as power closed/spring return open damper for use with Honeywell zoning systems
- Can be field-converted when used as an independent zone or for fresh air intake
- Rated to operate up to 1 in WC
- Blade closes off tightly against gasket for minimal leakage
- Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct
- 4 in lead wire motor electrical connection
- 90 deg motor nominal angular rotation
- Minimum 60 in-oz motor torque
- Nominal motor timing at 77 deg F ambient: energized at rated load - 30 sec, de-energized (spring return) - 10 sec
- Less than 1% at 1/2 in WC leakage
- Pressure drop: maximum at full open: 0.0329 in WC at 800 ft/min
- Motor shaft rotation direction clockwise, when energized and viewed from the base or shaft end
- Motor-mounting means direct connection to damper shaft
- Motor-mounting position multi-poise
Instruction/Installation Manual