Honeywell 2.0012001501262E+17 1047579

Honeywell HercuLine Electric Actuator, 0.4 A at 120 VAC, 0.2 A at 240 VAC, 100 - 130 VAC, 0 - 10 VDC Input, 60 Hz, 22.5 N-m Torque, Twisted Pair Cable with Shield Connection, 0 - 1000 ohm Input, NEMA 4, IP66 Enclosure, 30 sec at 50 Hz, 25 sec at 60 Hz Travel Time, Precision-Machined Die-Cast Aluminum, -40 to 75 deg C Operating, -40 to 93 deg C Storage, Environmental Conditions: 0 - 99% RH Non-Condensing

• 90 or 150 deg between 0% and 100% on scale, limited by mechanical stops
• Provides a means of positioning the actuator in the event of a power failure or setup
• Instant start/stop, non-coasting, non-burnout, continuous-duty, permanent magnet, synchronous induction motor, can be stalled up to 100 hr without damage
• Field programmable direction of rotation
• Continuous-duty cycle
• TRIAC switches for clockwise or anti-clockwise motor operation, transient voltage protection provided
• Programmable functions - input range, input filtering, input characterization, security, digital input action, deadband, fail-safe on loss of input signal, fail-safe on loss of position sensor, direction of rotation, relay closure action, communication parameters, split range operation, output range, alarms
• Display - (6) single LEDs provide actuator status and alarm indications
• Multi-segment LED displays that provides up to ten alphanumeric characters, display arrangement consists of two rows
• Basic motor unit plus digital electronics
• 150 deg travel
• Auxiliary switches outputs

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_2_0012001501262E_17_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_2_0012001501262E_17_Specification_Sheet.pdf