HEIL® Gas Furnace, N9MSE Model, 40000 Btu/hr Input BTU Rating, 115 VAC, 6.8 A Maximum, 9.5 A Unit, 1000 cu-ft/min, 1/2 hp at 500 - 1150 rev/min, 95.5% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, 1/2 in NPT Connection, Natural Gas Fuel, 2 -Burner, 7 in W x 11 in Dia Blower Size, 14-3/16 in W x 35 in H x 29-1/2 in D Cabinet Dimensions, 2 ton at 400 cu-ft/min, 2.5 ton at 350 cu-ft/min, 40 V-A at 24 VAC Transformer, Steel, 40 - 70 deg F Rise
AFUE Rating |
: |
95.5 % |
Amperage Rating |
: |
6.8 A Maximum, 9.5 A Unit |
Blower Size |
: |
11 in Dia x 7 in W |
CFM Rating |
: |
1000 cfm |
Cabinet Dimensions |
: |
14-3/16 in W x 29-1/2 in D x 35 in H |
Configuration |
: |
Multi-Position |
Connection Type |
: |
1/2 in NPT |
Frequency Rating |
: |
60 Hz |
Fuel Type |
: |
Natural Gas |
HP Rating |
: |
1/2 hp at 500 to 1150 rpm |
Input BTU Rating |
: |
40000 Btu/hr |
Material |
: |
Steel |
Model |
: |
N9MSE |
Number of Burners |
: |
2 |
Phase |
: |
1 ph |
Temperature Rise |
: |
40 to 70 deg F |
Tonnage |
: |
2 ton at 400 cfm, 2.5 ton at 350 cfm |
Transformer Rating |
: |
40 VA at 24 VAC |
Voltage Rating |
: |
115 VAC |
- Certified to leak 2% or less of nominal air conditioning cu-ft/min delivered when pressurized to 1 in WC with all present air inlets, air outlets and condensate drain ports sealed
- Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel primary heat exchanger, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, high quality, corrosion-resistant, pre-painted steel cabinet
- Direct vent (2-pipe), single pipe venting or ventilated combustion air
- 24 VAC humidifier terminal and electronic air cleaner terminal
- Innovative knobs for easy door removal and secure attachment
- Through the casing flue pipe for counterflow or horizontal applications with accessory
- At least 12 different venting configurations
- Self diagnostics with super bright LED
- Slide out heat exchanger and blower assembly
- Extra AFUE efficiency
- 4.5 - 13.6 in WC inlet gas pressure
- Flame roll-out sensors standard
-
Catalog
https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_G8MXN0451408A_Catalog.pdf
-
Instruction/Installation Manual
https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_N9MSE0401410A_Manual.pdf
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_N9MSE1202420A_Specification_Sheet.pdf