WELCOME TO OUR SITE! START SHOPPING!

  1. pin-int

HEIL® N4H442CKG 1071926

HEIL® Performance N4H4 Series N4H442CKG Split-System Heat Pump, 208 to 230 V, 31.2 A, 42000 Btu/hr Cooling/Heating BTU

  • Manufacturer: Carrier
  • Brand Name: HEIL®
  • Part Number: 1071926
  • MPN: N4H442CKG
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

HEIL® Split-System Heat Pump, Performance N4H4 Series, 208 to 230 V, 31.2 A, 1/4 hp, 60 Hz, 1 ph Phase, 1100 rpm Rotational Speed, 42000 Btu/hr Cooling/Heating, 3800 cfm, 11.5 EER Rating, 14 SEER, 8.2 HSPF, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 7/8 in Suction Line, 50 A Fuse Rating, 15.09 sq-ft Face Area, 20 FPI Coil, Propeller Direct Drive, Tonnage: 3.5 ton, 77 dBA without Sound Shield, 77 dBA with Sound Shield Sound Level, 1 Stages, Steel, Finish: Galvanized/Powder-Coated, 28-7/16 in H x 31-3/16 in W x 31-3/16 in D

Amperage Rating      :      31.2 A
BTU Rating      :      42000 Btu/hr Cooling/Heating
CFM Rating      :      3800 cfm
Coil Rating      :      15.09 sq-ft Face Area, 20 FPI
Compressor Type      :      Scroll
Dimensions      :      28-7/16 in H x 31-3/16 in W x 31-3/16 in D
Drive Type      :      Propeller Direct
EER Rating      :      11.5
Finish      :      Galvanized/Powder-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      50 A
HP Rating      :      1/4 hp
HSPF Rating      :      8.2
Liquid Line Size      :      3/8 in
Material      :      Steel
Number of Stages      :      1
Phase      :      1 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
SEER Rating      :      14
Series      :      Performance N4H4 Series
Sound Level      :      77 dBA without Sound Shield, 77 dBA with Sound Shield
Suction Line Size      :      7/8 in
Tonnage      :      3.5 ton
Voltage Rating      :      208 to 230 V
  • Sales code
  • Quiet performance (as low as 69 dB)
  • One-stage scroll compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy saving heating
  • Durably built-to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • One-speed fan motor
  • Non-ozone depleting R-410A refrigerant
  • Suction line accumulator factory installed, bi-flow filter drier included for field installation
  • Bi-flow filter drier included for field installation
  • Integrated solid state control with time temperature defrost
  • High/low pressure switches
  • Filter drier
  • Easy-access service valves on all model
  • External high and low refrigerant service ports
  • Only two-screws to access control panel
  • Baked-on powder-coated finish on all sides
  • Corrosion protection epoxy phenolic-coated aluminum fins
  • Coated, weather-resistant cabinet screws
  • Coastal-coated inlet grille with 3/8 in grille spacing for extra protection