WELCOME TO OUR SITE! START SHOPPING!
.png)
FISHER™ ED, EAD and EDR single-port control valves shown in figures one, two and three have balanced valve plugs, cage guiding and metal to metal seating for all general applications over a wide range of process pressure drops and temperatures. These general purpose, sliding stem valves are used for either throttling or on/off control of a wide variety of liquids and gases. The FISHER™ ED product line is available for a wide range of applications, including sulfide and chloride stress cracking environments common to the oil and gas production industries. To discuss available constructions, contact your EMERSON™ sales office and include the applicable codes and standards required for these environments.
FISHER™ Globe Valve, Series: ED Series, 3 in Nominal, Flanged Connection, 1500 psig, 600 lb Pressure Class, Air, Steam Media, 13.38 in Inlet to Outlet Length, Stainless Steel Body, PTFE Packing, PTFE Softgoods, 136 Cv Flow Coefficient (Cv), 316 deg C
| Body Material | : | Stainless Steel |
| Connection Type | : | Flanged |
| Flow Coefficient (Cv) | : | 136 Cv |
| Inlet to Outlet Length | : | 13.38 in |
| Media | : | Air, Steam |
| Nominal Size | : | 3 in |
| Packing Material | : | PTFE |
| Pressure Class | : | 600 lb |
| Pressure Rating | : | 1500 psig |
| Series | : | ED Series |
| Softgoods Material | : | PTFE |
| Temperature Rating | : | 316 deg C |
- The ENVIRO-SEAL™ packing systems feature PTFE, graphite ULF or duplex packing with live loading for reduced packing maintenance
- Valve plug stability - rugged cage guiding provides high valve plug stability, which reduces vibration and mechanical noise
- More flow capacity for initial investment - streamlined flow passages in the ED, EAD and EDR valves provide excellent capacities and flow
- Balanced valve plug construction - balanced valve plug construction permits use of smaller, lower cost FISHER™ actuators
- Also, trim inventory costs are cut because dimensional standardization permits use of most standard easy-e trim parts
- High temperature capability with Class IV or Class V shut-off - use of multiple graphite piston rings permit Class IV shut-off up to 593 deg C (1100 deg F)
- Sour service capability - unless otherwise noted, references are to NACE MR0175-2002
- Operating economy - increased wear resistance provided by standard hardened stainless steel trim means long service life
- Maintenance economy - the valve body can stay in the pipeline during removal of trim parts
- The EDR valve also features easy valve access without removing the actuator
Technical Bulletin