Fireye® TS350-2 1057710

The BLPS, TS350 and TS752 Series of pressure and temperature sensors are designed for use with the PPC4000 fuel air ratio controller and BurnerLogix™ burner management system with integrated boiler control. The pressure sensors (P/N BLPS-x) utilize a solid state pressure transducer to indicate steam pressure. The temperature sensors (P/N TS350-x and TS752-x) utilize a platinum, positive temperature coefficient sensing element to provide indication of water temperature, stack temperature, boiler water temperature of a steam boiler and outdoor air temperature. The pressure sensors have a maximum overpressure specification of 200% full scale output and 800% burst. The pressure sensors are equipped with a 1/4 in NPT male fitting. The immersion style temperature sensors have a 1/2 in NPT mounting for the 2 in, 4 in and 8 in thermowell probe. The pressure and temperature sensors provide a 4 to 20 mA control signal over their respective stated ranges to the PPC4000 and BurnerLogix™ control systems. No setting or calibration is required for either type of sensor. The PPC4000 and BurnerLogix™ control systems perform continuous safety checks on the operation of all pressure and temperature sensors to insure their safe and proper operation (e.g. under range, over range, open wiring, etc).

Fireye® Temperature Sensor, Series: TS350, +/-0.75 % Accuracy, 2 in Probe Length, 32 to 750 deg F

• 4 to 20 mA output, linear with temperature
• Stainless steel thermowell included with 1/2-14 NPT mounting

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Fireye_TS350_2_Specification_Sheet.pdf