WELCOME TO OUR SITE! START SHOPPING!
.png)
The Fireye® E110 FLAME-MONITOR™ system is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners. In conjunction with limit and operating controls, it programs the burner/blower motor, ignition and fuel valves to provide for proper and safe burner operation. The control also provides current operating status and lockout information in the event of a safety shutdown. The manner in which this information is displayed is dependent on the type of programmer (EP or EPD) and display module (ED510 or ED500). The E110 consists of the EB700 chassis, dust cover and shortened mounting screw (P/N 48-1836).
Fireye® Burner Control, Series: Flame-Monitor™ Series, Gas, Oil Fuel, 120 V, 50 VA Alarm Load Rating, 50/60 Hz, 6 ft Lead Length, 25 VA, 60 to 140 deg C, 85 % Humidity Rating, NPT Connection, Screw Mounting
| Alarm Load Rating | : | 50 VA |
| Connection Type | : | NPT |
| Frequency Rating | : | 50/60 Hz |
| Fuel Type | : | Gas, Oil |
| Humidity Rating | : | 85 % |
| Lead Length | : | 6 ft |
| Mounting Type | : | Screw |
| Power Rating | : | 25 VA |
| Series | : | Flame-Monitor™ Series |
| Temperature Rating | : | 60 to 140 deg C |
| Voltage Rating | : | 120 V |
- A non-volatile memory which allows the control to remember its history and present position even when power is interrupted
- A constant flame signal readout via display module or 0 to 10 VDC output
- Readout of main fuel operational hours and complete cycles via display module
- Modbus communications via RS485 multi-drop link
- Dipswitches located on the EP programmer to allow selectable purge time
- A run/check switch which allows the operator to stop the program sequence in any of three different positions (Purge, PTFI or Auto)
- Remote display capability
- Annunciate 16 additional interlocks using E300 expansion module
Specification Sheet