WELCOME TO OUR SITE! START SHOPPING!
.png)
The BurnerLogix system offers optional vacuum fluorescent (VFD) and liquid crystal (LCD) displays that may be either plugged in or mounted remotely to give full language descriptors of current status and diagnostic lockout information. In order to change the factory default parameters stored in the programmer module an optional keypad or display (BLV512 or BLL510) is required. All configurable parameters are stored within the program setup sub-menu. The keypad or display module provides tactile feedback keys that are used to access the sub-menus inherent in the BurnerLogix system. The optional alpha-numeric display is made up of two lines by 16 characters per line and is available in either vacuum fluorescent or liquid crystal formats. The advantage of VFD is high brightness and extended temperature range to -40 deg F. Both displays contain a fully functional keypad allowing the user to easily scroll through the various menus to view the current operating status, review programmer configuration and lockout history. When mounted remotely using kits 129-178-4 or 129-178-8, each display meets NEMA 4X requirements.
Fireye® LCD Display Module, -40 to 140 deg F
| Temperature Rating | : | -40 to 140 deg F |
- Two line x 16-characters
- Consistent flame signal read out via display module or 4 to 20 mA output
- Read out of main fuel operational hours and complete cycles via display module
- Modbus communications via RS485 multi-drop link
- Proof of fuel valve closure during off cycle
- Burn-in time of program parameters occurs after 8 hr of main valve on time
Specification Sheet