WELCOME TO OUR SITE! START SHOPPING!
.png)
The Fireye® Phoenix Series 2 type 85UVF/IRF flame scanners are microprocessor based devices utilizing a solid state flame detection sensor. The Phoenix flame scanners incorporate an internal flame relay with automatically set on/off thresholds, thereby eliminating the need for a remote flame amplifier or flame switch. Phoenix scanners detect the amplitude of the modulations (the flame "flicker") that occur within the targeted flame, over a wide frequency. During the scanner set-up procedure, the amplitudes of the target flame are automatically stored by the flame scanner, together with optimum on/off criteria. The appropriate sensor gain is automatically selected. Phoenix scanners incorporate full self-diagnostics and electronic self-checking.
Fireye® Integrated Flame Scanner, 24 V, 200 mA Contact Rating, 750 Ohm Resistance, LED Display, 8 Conductors, Flange Mounting, IP66 Enclosure, 8-Pin, Quick-Disconnect Electrical Connection, -40 to 150 deg F Operating, Aluminum Housing, Gray, Polyester-Coated, Additional Information: 18 AWG Cable
| Additional Information | : | 18 AWG Cable |
| Color | : | Gray |
| Contact Rating | : | 200 mA |
| Display Type | : | LED |
| Electrical Connection Type | : | 8-Pin, Quick-Disconnect |
| Enclosure Type | : | IP66 |
| Finish | : | Polyester-Coated |
| Housing Material | : | Aluminum |
| Mounting Type | : | Flange |
| Number of Conductors | : | 8 |
| Operating Temperature | : | -40 to 150 deg F |
| Resistance | : | 750 Ohm |
| Voltage Rating | : | 24 V |
Specification Sheet