WELCOME TO OUR SITE! START SHOPPING!
.png)
The Kidde® i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120 V power source with 9 V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde® strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Firex® Interconnect Alarm, Smoke Detection Method, Battery, Audio Alarm, LED Visual Indicator, 85 dB Sound Level, 5 to 95 % Humidity Rating, Ionization Sensor, 0.5 to 1.28 % Sensitivity, Quick-Connect Plug Wire, Hardwired Connection, 80 mA Alarm Current, 120 VAC, 40 to 100 deg F, 5.6 in Width, 1.55 in Depth
| Alarm Current | : | 80 mA |
| Alarm Type | : | Audio |
| Connection Type | : | Hardwired |
| Depth | : | 1.55 in |
| Detection Method | : | Smoke |
| Humidity Rating | : | 5 to 95 % |
| Power Source | : | Battery |
| Sensitivity | : | 0.5 to 1.28 % |
| Sensor Type | : | Ionization |
| Sound Level | : | 85 dB |
| Temperature Rating | : | 40 to 100 deg F |
| Visual Indicator Type | : | LED |
| Voltage Rating | : | 120 VAC |
| Width | : | 5.6 in |
| Wire Type | : | Quick-Connect Plug |
- The Kidde® i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120 V power source with 9 V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde® strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
- Front battery pull tab allows battery activation without removing alarm from mounting bracket
- Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections
- Pre-stripped wiring harness with easy off cap does not require stripper tool
- Tinned strands increase conductivity and wire nut grip
- One button design for easy operation and less confusion
- Operates Hush® and alarm test
- Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp
- Dust cover protects sensor from contaminates during construction reducing nuisance alarms
- Tamper resist locking feature deters alarm theft
- Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system
- Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms
Owners/User Manual