WELCOME TO OUR SITE! START SHOPPING!
.png)
The Kidde® i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10 year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor - which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires - with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarms overall performance in all fires and significantly reduces the potential for a nuisance alarm.
Firex® Combination Smoke and Carbon Monoxide Alarm, 120 VAC, Lithium Battery, 40 to 100 deg F
| Power Source | : | 120 VAC |
| Power Supply | : | Lithium Battery |
| Temperature Rating | : | 40 to 100 deg F |
- The Kidde® i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10 year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor - which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires - with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarms overall performance in all fires and significantly reduces the potential for a nuisance alarm.
- No battery replacement required over the 10 year life of the alarm
- Eliminates worry about removal or unauthorized deactivation of alarm
- Verbally announces fire or warning carbon monoxide to help distinguish between threats
- Interconnects up to 24 Kidde® devices (of which 18 can be initiating)
- Temporarily silences nuisance alarms for approximately 9 min and will not allow Hush® mode unless the unit is in alarm mode
- Announces carbon monoxide previously detected if alarm has detected co level of 100 ppm or higher since it was last reset
- Ideal for detecting fast flaming and other types of fires
- Illuminates to indicate the unit is receiving AC power
- Flashes once every 60 s to indicate battery only mode
- Flashes once per second during alarm to indicate initiating alarm
- Flashes once every 16 s to indicate smoke or CO previously detected
- Flashes every 2 s while the alarm is in Hush® mode
- When a dangerous level of smoke or carbon monoxide is detected the red LED will flash
- If the unit malfunctions, the red LED will flash and the unit will chirp every 30 s
Owners/User Manual