WELCOME TO OUR SITE! START SHOPPING!
.png)
FENWAL CONTROLS Ignition Control Module, Series: 35-66 Series, 24 VAC, 50/60 Hz, Input Current : 300 mA at 24 VAC with Gas Valve and Inducer Blower Relays Energized (Control Only), Gas Valve: 2 A at 24 VAC Contact Rating, 15 s Pre-Purge and Inter-Purge, 7 s Ignition Trial Time Delay, -40 to 176 deg F, 5.69 in L x 3.94 in W x 1.87 in H, For Use With: Gas Furnaces, Boilers and Water Heaters
| Contact Rating | : | Input Current : 300 mA at 24 VAC with Gas Valve and Inducer Blower Relays Energized (Control Only), Gas Valve: 2 A at 24 VAC |
| Dimensions | : | 5.69 in L x 3.94 in W x 1.87 in H |
| Frequency Rating | : | 50/60 Hz |
| Series | : | 35-66 Series |
| Suitable For Use With | : | Gas Furnaces, Boilers and Water Heaters |
| Temperature Rating | : | -40 to 176 deg F |
| Time Delay | : | 15 s Pre-Purge and Inter-Purge, 7 s Ignition Trial |
| Voltage Rating | : | 24 VAC |
- With inducer blower relay
- Microprocessor based
- Safe start with Detect-A-Flame flame sensing technology
- Inducer blower control and airflow switch monitoring
- System diagnostic LED
- Flame current test points
- Local or remote flame sensing
- 0.7 uA minimum flame sensitivity
- 0.8 sec maximum flame failure response time
- Once per second minimum flame detector self-check rate
- Moisture-resistance conformal coated to operate non-condensing to 95% RH
- Dual speed blower and 120/240 field selectable line voltage product designation
- No post-purge all QC terminals without full time power (W Only)
- Gray (Noryl N-190) enclosure
Specification Sheet