WELCOME TO OUR SITE! START SHOPPING!
.png)
Pipes must be at least 3 ft (0.9 m) long and at least 3/8 in (9.5 mm) and no more than 1-1/2 in (38.1 mm) in diameter. For pipes of other sizes, please refer to the product selection guide for other cable options.
EasyHeat™ Water Pipe Heating Cable, XLPE Insulation, PVC Jacket, 24 ft Length, Additional Information: 168 W Wattage Rating
| Additional Information | : | 168 W Wattage Rating |
| Insulation Material | : | XLPE |
| Jacket Material | : | PVC |
| Length | : | 24 ft |
- Measure your pipe straight along the bottom of a horizontal pipe or on the "weather side" of a vertical pipe (including valves)
- If a cable suitable for your pipe is unavailable or out of stock, you can use two cables together on one pipe
- Keeps water flowing at ambient temperatures down to -40 deg F (-40 deg C)
- Cables are rated at 7 W per foot (0.30 m)
- Built-in thermostat turns on at 38 deg F (3 deg C) or below and turns off at 45 deg F (7 deg C) and above
- Plugs into a standard 120 VAC outlet, must be GFCI protected
- Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in Dia
- Pre-assembled and ready to install
- Integral thermostat saves energy by powering the cable only when needed
Specification Sheet