WELCOME TO OUR SITE! START SHOPPING!
.png)
EasyHeat™ AHB automatic electric water pipe heating cable is a preassembled and ready to install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
EasyHeat™ Pipe Heating Cable, 1-1/2 in Size, 120 VAC, 1.1 A Amperage Rating, 126 W Power, -40 deg F Temperature Rating, 18 ft L Dimensions
| Amperage Rating | : | 1.1 A |
| Dimensions | : | 18 ft L |
| Power Rating | : | 126 W |
| Size | : | 1-1/2 in |
| Temperature Rating | : | -40 deg F |
| Voltage Rating | : | 120 VAC |
- Fixed resistance, pre-terminated, for commercial and residential applications
- Keeps water flowing at ambient temperatures down to -40 deg F (-40 deg C)
- Cables are rated at 7 W per 1 ft (0.3 m)
- Built-in thermostat turns on at +38 deg F (+3 deg C) or below and turns off at +45 deg F (+7 deg C) and above
- Plugs into a standard 120 VAC outlet, must be GFCI protected
- Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather-resistant PVC (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in Dia
- Pre-assembled and ready to install
- Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
- Integral thermostat saves energy by powering the cable only when needed
Catalog
Video Link