WELCOME TO OUR SITE! START SHOPPING!
.png)
The nitrogen purge tool is a quick and easy way to purge copper pipes with nitrogen. Then, with a turn of the dial, quickly switch to a very low flow of nitrogen to properly braze the copper. It has a durable aluminum design so you can just throw it into your tool bag when you are done.
DiversiTech® Nitrogen Purge Tool, SAE Flare, 50 lb/sq-in Minimum, 200 lb/sq-in Maximum, Red/Gold, 2 in L x 2 in H
| Color | : | Red/Gold |
| Connection Type | : | SAE Flare |
| Dimensions | : | 2 in L x 2 in H |
| Pressure Rating | : | 50 lb/sq-in Minimum, 200 lb/sq-in Maximum |
- Standard fittings - quickly attaches to the outlet of a standard nitrogen regulator, set the purge tool to off, connect standard 1/4 in refrigerant hoses to tool and in seconds you are ready to purge and braze
- Quick change dial - the nitrogen purge tool from diversitech has a quick and easy 3 click position dial, quickly switch between purge, braze and off settings to get the correct amount of nitrogen flow for each one, no fumbling with a flow indicator valve, just click to purge or braze and you are good to go
- 50 psi inlet pressure - be sure you have the enough pressure to purge and braze properly, Diversitech's nitrogen purge tool is designed to operate with a 50 psi inlet pressure, maximum inlet pressure of 200 psi
- Robust design - The nitrogen purge tool from Diversitech is designed to be tough and durable, throw it into your tool bag, it won't break like nitrogen flow meters
- 1/4 in fitting size
- Nitrogen gas type
- Aluminum material
- 7/16-20 thread size
Specification Sheet