WELCOME TO OUR SITE! START SHOPPING!
.png)
DAIKIN DBH0364B000001S 1016110
DAIKIN DBH0364B000001S Packaged Rooftop Heat Pump Unit, 3 ton Nominal, 460 VAC, 5.77 A, 1170 cfm, 14 SEER
- Manufacturer: Daikin Comfort Technologies
- Brand Name: DAIKIN
- Part Number: 1016110
- MPN: DBH0364B000001S
- Min. Order Qty: 1
- Qty. Interval: 1 Sign In for Availability
-
Price:
The DBH heat pump packaged rooftop units are built to perform, with features and options that provide lower installation and operating costs, superior indoor air quality, quiet operation and longevity.
DAIKIN Packaged Rooftop Heat Pump Unit, 74 in W x 48-5/16 in D x 39-7/8 in H, Series: DBH, 3 ton Nominal, 35000 Btu/hr Cooling BTU Rating, 460 VAC, 5.77 A, 1 hp at Indoor, 0.17 hp at Outdoor HP Rating, 60 Hz Frequency, 3 ph, 1725 rpm Evaporator Motor, 810 rpm Condenser Fan Rotational Speed, Scroll Compressor, 1170 cfm Rating, 14 SEER, 8 HSPF, 11.5 EER, Base Efficiency Configuration, NPT Connection, 3/4 in Connection, R-410A Refrigerant,1 Stage, Belt Drive, 4/16 in Fins per Inch, (4) 14 x 20 x 2 in Filter, Steel, Galvanized/Powder Coated
| Amperage Rating | : | 5.77 A |
| CFM Rating | : | 1170 cfm |
| Compressor Type | : | Scroll |
| Configuration | : | Base Efficiency |
| Connection Size | : | 3/4 in |
| Connection Type | : | NPT |
| Cooling BTU Rating | : | 35000 Btu/hr |
| Dimensions | : | 74 in W x 48-5/16 in D x 39-7/8 in H |
| Drive Type | : | Belt |
| EER Rating | : | 11.5 |
| Filter Size | : | (4) 14 x 20 x 2 in |
| Finish | : | Galvanized/Powder Coated |
| Fins per Inch | : | 4/16 in |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1 hp at Indoor, 0.17 hp at Outdoor |
| HSPF Rating | : | 8 |
| Material | : | Steel |
| Nominal Capacity | : | 3 ton |
| Number of Stages | : | 1 |
| Phase | : | 3 ph |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1725 rpm Evaporator Motor, 810 rpm Condenser Fan |
| SEER Rating | : | 14 |
| Series | : | DBH |
| Voltage Rating | : | 460 VAC |
- Daikin® packaged units are designed with an easier and faster installation in mind for both new construction and retrofit
- Our packaged rooftop units are built to be a direct replacement for most rooftop units on the field without the need of a curb adapter, to be able to replace the unit in a shorter time and at a lower cost
- Daikin® packaged rooftop units are made with high quality galvanized steel with a powder paint finish to provide higher corrosion resistance
- High performance, low noise scroll compressors, adjust the speed to match the required total cooling and heating load for efficient part load control
- Indoor forward curb fans paired with belt drive motors provide an easy in the field belt and pulley adjustment for airflow control
- All units use large face area outdoor coils, these coils are constructed with seamless copper tubes, mechanically bonded into aluminum plate-type fins with full drawn collars to completely cover the tubes for high operating efficiencies
- Evaporator coil, condenser coil, compressors and refrigerant circuit are designed for heat pump operation
- Packaged rooftop units come equipped with a well-organized, large, easy to use weather proof internal control box with easy access, for a better user experience
- Filtration unit provides a draw-through filter section as standard for better air quality and longer lasting component maintenance
- Wide ranging of electric heat selections effectively handle most comfort heating demand from morning warm-up control to full heat
- ETL approved electric heat is factory assembled, installed and tested
- Electrical units are completely wired and tested at the factory to provide faster commissioning and start-up
Catalog