WELCOME TO OUR SITE! START SHOPPING!

  1. pin-int

Comfortmaker® CHS072HAA0A00A 1031937

Comfortmaker® CHS Series CHS072HAA0A00A Split-System Heat Pump, 208 to 230 V, 26.8 A, 70000 Btu/hr Cooling/Heating BTU

  • Manufacturer: Carrier
  • Brand Name: Comfortmaker®
  • Part Number: 1031937
  • MPN: CHS072HAA0A00A
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

Comfortmaker® Split-System Heat Pump, CHS Series, 208 to 230 V, 26.8 A, 6.4 kW Cooling, 5.2 kW Heating, 1/4 hp, 60 Hz, 1 ph Phase, 1100 rpm Rotational Speed, 70000 Btu/hr Cooling/Heating, 3000 cfm, 11 EER Rating, 12.6 IEER, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 45 A Fuse Rating, 17.5 sq-ft Face Area, 17 FPI Coil, Direct Drive, Tonnage: 6 ton, 82 dBA Sound Level, 1 Stages, Steel, Finish: Bonderized/Galvanized/Pre-Painted Baked Enamel, 42-3/8 in H x 59-3/8 in W x 45-7/8 in D

Amperage Rating      :      26.8 A
BTU Rating      :      70000 Btu/hr Cooling/Heating
CFM Rating      :      3000 cfm
Coil Rating      :      17.5 sq-ft Face Area, 17 FPI
Compressor Type      :      Scroll
Dimensions      :      42-3/8 in H x 59-3/8 in W x 45-7/8 in D
Drive Type      :      Direct
EER Rating      :      11
Finish      :      Bonderized/Galvanized/Pre-Painted Baked Enamel
Frequency Rating      :      60 Hz
Fuse Rating      :      45 A
HP Rating      :      1/4 hp
IEER Rating      :      12.6
Liquid Line Size      :      3/8 in
Material      :      Steel
Number of Stages      :      1
Phase      :      1 ph
Power Rating      :      6.4 kW Cooling, 5.2 kW Heating
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
Series      :      CHS Series
Sound Level      :      82 dBA
Tonnage      :      6 ton
Voltage Rating      :      208 to 230 V
  • One-stage cooling capacity control
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of quiet operation
  • Comfort alert diagnostic and troubleshooting control system, LED go-no-go and fault code, built-in time guard anti-short cycle, phase protection, fault code retention logic, low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125 deg F and down to 35 deg F
  • All units factory run tested
  • One-circuit
  • Standard aluminum fin/copper tube
  • No service, electrical options
  • Standard electronic mechanical control base unit controls