WELCOME TO OUR SITE! START SHOPPING!
.png)
The CC3-HCMSESP represents the most contractor-friendly solution today for eliminating bypass. The CC3-HCMSESP model is designed to fit up to three-zone applications for single stage and multi-stage heat/cool systems in residential and light commercial applications. This zone control system comes with built-in ESP static pressure control which eliminates the need for a bypass damper when used with the standard three-wire MD Series dampers. The system works like any standard zone control system with one exception. As zone dampers open and close, the built-in ESP static pressure control continuously monitors the system static pressure and if required, sends a signal to zone dampers that are in the closed position to open to a point where the proper static pressure level is maintained. The small amount of air that is allowed to bleed into non-calling zones eliminates air noise and assures proper airflow through the HVAC system preventing coil freeze-up.
CLEAN COMFORT® Zone Panel, Series: CC3, 3 Zones, Auto, Snap Track Connection, 3-Wire Electrical Connection, 2 Heat/2 Cool Stages, 3-Wire Terminal, Aluminum, -40 to 150 deg F, 8 in H x 6 in W x 1-1/2 in D
| Changeover | : | Auto |
| Connection Type | : | Snap Track |
| Dimensions | : | 8 in H x 6 in W x 1-1/2 in D |
| Electrical Connection | : | 3-Wire |
| Material | : | Aluminum |
| Number of Zones | : | 3 |
| Series | : | CC3 |
| Stages | : | 2 Heat/2 Cool |
| Temperature Rating | : | -40 to 150 deg F |
| Terminal Type | : | 3-Wire |
- Adjustable static pressure switch eliminating the need for a bypass damper
- First call priority with time share
- LED status indication
- Independent fan control by zone
- Short cycle protection
- Competitively priced
- Requires three-wire power open, power close dampers
- Adjustable high and low limit
Specification Sheet