Carrier® 59MN7B120C24--22 1091726

The 59MN7B Multipoise Variable-Capacity Condensing Gas Furnace features the modulating Infinity™ System. The innovative modulating gas valve is at the heart of this furnace's quiet operation, along with the variable-speed Infinity™ ECM blower motor and variable-speed inducer motor. This furnace also provides 3.5 times tighter temperature control than single-stage furnaces. With an Annual Fuel Utilization Efficiency (AFUE) up to 98.5%, this Infinity™ gas furnace provides exceptional savings over standard furnaces as well. This Infinity™ Gas Furnace also features 4-way multi-poise installation flexibility. The 59MN7B can be vented as a direct-vent/two-pipe furnace or as an optional ventilated combustion air application. A Carrier® Infinity™ Control and Infinity™ Air Conditioner or Heat Pump can be used to form a complete Infinity™ System. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified in Canada. This furnace is not designed for use in recreation vehicles, manufactured (mobile) homes or outdoors.

Carrier® Condensing Gas Furnace, Series: Infinity® Series, Model: 59MN7B, 120000 Btu/hr Input BTU Rating, 47000 to 117000 Btu/hr Output BTU Rating, 115 V, 14.1 A, 2200 cfm Rating, 1 hp, 95 to 97.2 % AFUE Rating, 1 ph Phase, 60 Hz, 1 Stages, Downflow, Horizontal, Upflow, NPT Connection, 1/2 in Connection, Liquid Propane, Natural Gas Fuel, 6 Burners, 11 in Dia x 11 in W Blower Size, 24-1/2 in W x 29-1/2 in D x 35 in H Cabinet Dimensions, Common Variable-Speed Constant Airflow ECM Motor, 300 to 1300 rpm Rotational Speed, Vent, Ducted or Ductless, 20 A Fuse Rating, 24 V Transformer Rating, Power Heat™ Ignition System, Hot Surface Silicon Nitride Ignition, 4.5 to 13.6 in-WC, Steel, Pre-Painted, 35 to 65 deg F Minimum, 50 to 80 deg F Intermediate, 45 to 75 deg F Maximum Temperature Rise

• All sizes meet Energy Star® Version 4 criteria for gas furnaces - 95%+ AFUE
• Supports single and multiple-zone Infinity® systems
• Ideal height 35 in cabinet - short enough for taller coils, but still allows enough room for service
• Infinity® features - match with the Infinity® control for Infinity® system benefits
• Integral part of the Ideal Humidity System® technology
• SmartEvap™ technology helps control humidity levels in the home when used with a compatible humidity control system
• ComfortFan™ technology allows control of continuous fan speed from a compatible thermostat
• External media filter cabinet included
• Variable-speed blower and inducer motors, modulating gas valve
• Self-diagnostics and extended diagnostic data through the advanced product monitor (APM) accessory or Infinity® user interface
• Adjustable blower speed for cooling, continuous fan and dehumidification
• Aluminized steel primary heat exchanger
• Stainless steel condensing secondary heat exchanger
• Factory-configured ready for upflow applications
• Fully insulated casing including blower section

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Carrier_59MN7B060C1714_Catalog.pdf
• Owners/User Manual https://assets.unilogcorp.com/267/ITEM/DOC/Carrier_59MN7B060C1714_Owners_User_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Carrier_59MN7B060C1714_Specification_Sheet.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/Carrier_59MN7B060C1714_Warranty.pdf