WELCOME TO OUR SITE! START SHOPPING!
.png)
The 50PCH indoor water-cooled heat pump unit with Puron® refrigerant is designed for horizontal installation with a variety of airflow configurations. The unit's compact footprint allows for easy installation where space is a concern. The 50PCH unit provides a practical and economical approach for comfort conditioning requirements in renovation applications and in new construction. The 50PCH unit can be used in both traditional and geothermal applications and is also ideally-suited for geothermal LEED®1 certification driven projects.
Carrier® Aquazone™ Horizontal Water Source Heat Pump, Model: 50PCH, 265 V, 60 Hz, 1 ph Phase, 950 cfm Rating, 13.4 EER Rating, FNPT Connection, Scroll Compressor Type, R-410A Refrigerant, 7 gpm Flow Rate, 25 A Fuse Rating, 16 x 25 x 1 in Filter, 9 x 7 in Blower Size, Direct Drive, 400 psig, Steel, Galvanized, 22 in W x 43 in D x 18 in H, Additional Information: 2-1/2 in Capacity, Right Return, Left Discharge, PSC Blower Motor Horizontal Airflow, Standard C Control Package Control
| Additional Information | : | 2-1/2 in Capacity, Right Return, Left Discharge, PSC Blower Motor Horizontal Airflow, Standard C Control Package Control |
| Blower Size | : | 9 x 7 in |
| CFM Rating | : | 950 cfm |
| Compressor Type | : | Scroll |
| Connection Type | : | FNPT |
| Dimensions | : | 22 in W x 43 in D x 18 in H |
| Drive Type | : | Direct |
| EER Rating | : | 13.4 |
| Filter Size | : | 16 x 25 x 1 in |
| Finish | : | Galvanized |
| Flow Rate | : | 7 gpm |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 25 A |
| Material | : | Steel |
| Model | : | 50PCH |
| Phase | : | 1 ph |
| Pressure Rating | : | 400 psig |
| Refrigerant Type | : | R-410A |
| Voltage Rating | : | 265 V |
- Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 50 to 100 deg F
- Fully insulated unit with acoustic-type insulation
- Performance monitor equipped
- Copper or cupronickel heat exchanger
- Three service panels for servicing compressor section
- All service may be done through large removable front or side panels
- Blower housing can be serviced without disconnecting ductwork
- Easy removal of control box for access to all refrigerant components
- Refrigerant circuit equipped with high/low pressure ports
- Standard 1 in filter
- Compact footprint
- Units may be mounted in ceilings, closets, attics and more
- Ducted or free-return connections
- All units pre-wired and factory charged with refrigerant
- Horizontal units include factory-installed hanger isolation brackets
Instruction/Installation Manual