WELCOME TO OUR SITE! START SHOPPING!
.png)
The Single Duct Air Terminal Zone Controller provides dedicated control functions for single duct terminals with modulating heat or up to 2-stages of heat. The zone controller is part of the Carrier® ComfortID™ System.
Carrier® ComfortID™ Zone Controller, 24 VAC, VA Rating: 40 VA, 50/60 Hz, 0 to 90 % Humidity Rating, 2 Stages, Single Duct Air Terminal, 22 to 18 AWG Wire, 32 to 140 deg F, 9 in L x 5 in W x 3 in H
| Dimensions | : | 9 in L x 5 in W x 3 in H |
| Frequency Rating | : | 50/60 Hz |
| Humidity Rating | : | 0 to 90 % |
| Stages | : | 2 |
| Temperature Rating | : | 32 to 140 deg F |
| Terminal Type | : | Single Duct Air |
| VA Rating | : | 40 VA |
| Voltage Rating | : | 24 VAC |
| Wire Size | : | 22 to 18 AWG |
- Provides pressure independent (VAV) control
- Uses proportional integral derivative (PID) control
- Mounts directly onto VAV box damper shaft
- Terminal fan control
- For terminals up to 9000 cfm or 3.4 sq-ft inlet (primary air)
- Auxiliary heating control of modulating (floating) hot water, single-position hot water, single or two-stage electric or zone perimeter heat
- Quick and easy commissioning and balancing process
- Automatic self-calibration of airflow transducer
- Capable of stand-alone operation with supply air temperature sensor
- Actuator preassembled to housing
- Capable of demand controlled ventilation support with field installed IAQ sensor
- Easy access to airflow sensor pneumatic connections
- Uses Carrier® Comfort™ network (CCN) protocol
- Capable of high-speed 38.4 k baud communications network operation
- 128 controller maximum system (must be located on same CCN bus segment)
Catalog