WELCOME TO OUR SITE! START SHOPPING!
.png)
The infinity™ 18VS heat pump offers high-efficiency variable speed performance in a remarkably small cabinet and provides up to 11 HSPF heating efficiency and up to 19 SEER cooling efficiency. The variable speed Inverter capacity control delivers up to 5 stages of operation for exceptional load matching, dehumidification and zoning performance. This product has been designed and manufactured to provide flexible system matching and work with a wide variety of indoor units and controls.
Carrier® Variable Speed Heat Pump, Infinity® Series, Model: 25VNA8, 208/230 V, 18.3 A, 1/3 hp, 60 Hz, 1 ph Phase, 1050 rpm Rotational Speed, 36000 Btu/hr, 2500 cfm, 10 EER Rating, 17.5 SEER, 10 HSPF, Sweat Connection, Rotary Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 3/4 in Suction Line, 40 A Fuse Rating, Direct Drive, Tonnage: 3 ton, 55 dBA Sound Level, Rooftop Mounting, Steel, Finish: Baked Enamel-Coated/Galvanized, 10 to 66 deg F, 38-15/16 in H x 23-1/8 in W, Additional Information: TXV Control
| Additional Information | : | TXV Control |
| Amperage Rating | : | 18.3 A |
| BTU Rating | : | 36000 Btu/hr |
| CFM Rating | : | 2500 cfm |
| Compressor Type | : | Rotary |
| Connection Type | : | Sweat |
| Dimensions | : | 38-15/16 in H x 23-1/8 in W |
| Drive Type | : | Direct |
| EER Rating | : | 10 |
| Finish | : | Baked Enamel-Coated/Galvanized |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 40 A |
| HP Rating | : | 1/3 hp |
| HSPF Rating | : | 10 |
| Liquid Line Size | : | 3/8 in |
| Material | : | Steel |
| Model | : | 25VNA8 |
| Mounting Type | : | Rooftop |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1050 rpm |
| SEER Rating | : | 17.5 |
| Series | : | Infinity® Series |
| Sound Level | : | 55 dBA |
| Suction Line Size | : | 3/4 in |
| Temperature Rating | : | 10 to 66 deg F |
| Tonnage | : | 3 ton |
| Voltage Rating | : | 208/230 V |
- Microtube Technology™ refrigeration system
- Puron® refrigerant-environmentally sound, won't deplete the ozone layer and low lifetime service cost
- Front-seating service valves
- Inverter control drives compressor and fan motor
- No control module attached to fan motor
- Pressure equalizer valve for easy compressor starting
- High pressure switch
- Suction pressure transducer
- Electronic expansion valve (EXV) for heating, TXV for cooling
- Compressor discharge temperature sensor
- Suction temperature sensor
- Internal crankcase heater standard
- Two control wires to outdoor unit in complete infinity™ system and touch control
- Energy tracking capability with the infinity™ touch control (energy tracking has the ability to monitor and estimate the energy consumption of your infinity™ system)
- Smaller and lighter than two-stage units
Catalog