WELCOME TO OUR SITE! START SHOPPING!

Carrier® 14B0013N13 1089082
  1. pin-int

Carrier® 14B0013N13 1089082

Carrier® 14B0013N13 Damper Actuator, 24 VAC/VDC, 2.5 W Running, 1 W Holding, Zinc-Coated Metal

  • Manufacturer: Carrier
  • Brand Name: Carrier®
  • Part Number: 1089082
  • MPN: 14B0013N13
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Carrier® Damper Actuator, 24 VAC/VDC, 50/60 Hz, 2.5 W Running, 1 W Holding, 5 V-A VA, 3 ft Plenum Rated Cable Electrical Connection, 150 sec Constant Independent of Load Motor, Spring: Less Than 25 sec at -4 to 122 deg F ,Less Than 60 sec at -22 deg F Timing, Zinc-Coated Metal, 35 in-lb Torque, 100 kohm, 500 ohm Input, Less Than 30 dBA Running, 62 dBA Spring Return, -22 to 122 deg F Ambient, -40 to 176 deg F Storage, NEMA 2, IP54 Enclosure, 5 - 90% RH Non-Condensing Humidity, 7.67 in L x 3.86 in W, Proportional Modulation Control Signal

Control Signal      :      Proportional Modulation
Dimensions      :      7.67 in L x 3.86 in W
Electrical Connection      :      3 ft Plenum Rated Cable
Enclosure Type      :      NEMA 2, IP54
Frequency Rating      :      50/60 Hz
Humidity Rating      :      5 to 90% RH Non-Condensing
Input Impedance      :      100 kOhm, 500 Ohm
Material      :      Zinc-Coated Metal
Noise Level      :      <30 dBA Running, 62 dBA Spring Return
Power Rating      :      2.5 W Running, 1 W Holding
Temperature Rating      :      -22 to 122 deg F Ambient, -40 to 176 deg F Storage
Timing Range      :      150 s Constant, Independent of Load Motor, <25 s at -4 to 122 deg F ,<60 s at -22 deg F Spring
Torque Rating      :      35 in-lb
VA Rating      :      5 VA
Voltage Rating      :      24 VAC/VDC
  • Electronic throughout 0 - 95 deg rotation overload protection
  • 2 - 10 VDC, 4 - 20 mA operating range Y
  • 2 - 10 VDC (maximum 0.7 mA) for 95 deg feedback output U
  • Maximum 95 deg, adjustable with mechanical stop angle of rotation
  • Spring - reversible with CW/CCW-mounting, motor: reversible with built-in switch direction of rotation
  • Visual indicator, 0 - 95 deg position indication
  • Maintenance-free servicing
  • 24 V for 2 - 10 VDC or 4 - 20 mA control signal
  • Output signal of 2 - 10 VDC for position indication
  • The LF Series actuators provide true spring return operation for reliable fail-safe application and positive close-off on air tight dampers
  • The spring return system provides consistent torque to the damper with and without, power applied to the actuator
  • The actuator is mounted directly to a damper shaft from 3/8 in up to 1/2 in Dia by means of its universal clamp, 1/2 in shaft centered at delivery