WELCOME TO OUR SITE! START SHOPPING!

  1. pin-int

Carlyle® 06DM3136AC3670 1011491

Carlyle® 06D 06DM3136AC3670 Semi-Hermetic Compressor, 2.66 ton at Medium Temperature, 4.74 ton at High Temperature, 5 hp

  • Manufacturer: Carrier
  • Brand Name: Carlyle®
  • Part Number: 1011491
  • MPN: 06DM3136AC3670
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

Carlyle® Semi-Hermetic Compressor, Series: 06D, 56.9 MBtu/hr Air Cooled, 62.9 MBtu/hr Water Cooled BTU, 2.66 ton at Medium Temperature, 4.74 ton at High Temperature, 7/8 in Sweat Suction Line, 5/8 in Sweat Discharge Line, 13 cu-ft/min, 460 VAC, 8.6 A Rated Load, 50 A Locked Rotor, 13.5 A Maximum Continuous, 5 hp, R-22 Refrigerant, 1750 rev/min Speed, 0 - 50 deg F Suction, 45 deg F at Air Cooled, 40 deg F at Water Cooled Saturated Suction, 130 deg F at Air Cooled, 105 deg F at Water Cooled Saturated Condensing, 22 in L x 15 in W x 15 in H

Amperage Rating      :      8.6 A Rated Load, 50 A Locked Rotor, 13.5 A Maximum Continuous
BTU Rating      :      56.9 MBtu/hr Air Cooled, 62.9 MBtu/hr Water Cooled
CFM Rating      :      13 cfm
Dimensions      :      22 in L x 15 in W x 15 in H
Discharge Line Size      :      5/8 in Sweat
Power Rating      :      5 hp
Refrigerant Type      :      R-22
Series      :      06D
Speed Rating      :      1750 rpm
Suction Line Size      :      7/8 in Sweat
Temperature Rating      :      0 to 50 deg F Suction, 45 deg F at Air Cooled, 40 deg F at Water Cooled Saturated Suction, 130 deg F at Air Cooled, 105 deg F at Water Cooled Saturated Condensing
Tonnage      :      2.66 ton at Medium Temperature, 4.74 ton at High Temperature
Voltage Rating      :      460 VAC
  • High-flow, automatically reversible oil pump provides positive displacement oil lubrication
  • Crankcase venting system equalizes pressure during start-up and assures oil return to sump
  • Oversize sump holds extra oil in crankcase to prevent levels dropping below safe lubrication range during flooded starts
  • Contoured pistons lower cylinder clearances to increase compressor capacity and efficiency
  • High efficiency valves provide increased refrigerant flow and lower pressure drops
  • Electronic oil pressure switch
  • Medium temperature-no unloaders replaces all "A" in service
  • Motor variables-four-cylinders: 5 hp and 6-cylindesr: 27 lb ft
  • 6D48-249 crankcase assembly, two-cylinder bore
  • Remanufactured service compressor
  • Suction service valve variable-motor end location, 2-bolt end cover description, 30 deg orientation
  • Internal thermostat variable for A, C and E
  • XL-start only
  • Future design-1-step suction cut-off electric unloaders
  • Packaging variation-service unit single pack, base unit unpackages
  • Four-cylinders
  • 4.5 pt oil charge
  • 14.88 in L x 8.88 in W mounting
  • 1 in stroke
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Carlyle_06DH5376BC3600_Catalog.pdf
  • pdfFull Engineering Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Carlyle_06DM3136AC3670_Full_Engineering_Drawing.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Carlyle_06DR8206DC3650_Manual.pdf